Product supplierTan Upholstered Cantilever Conference Armchair, Tan leather-look upholstery with tightly tailored plain face and raised side seams
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 640 × 1020 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 18 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Seat foam thickness | 80 mm | |
| Back foam thickness | 60 mm | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam rebound rate | 40% | |
| Recommended daily occupancy | 8 hours | |
| Seating capacity | 1 person | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer seat and back upholstery | Tan leather-look upholstery with tightly tailored plain face and raised side seams | |
|---|---|---|
| Upholstery substrate | 1.2 mm minimum composite upholstery layer over foam | |
| Seat cushion | 80 mm high-resilience polyurethane foam on a load-bearing seat board | |
| Back cushion | 60 mm shaped polyurethane foam bonded to the contoured inner back panel | |
| Inner support shell | 12 mm molded structural composite board forming seat and back carrier | |
| Integrated arm pads | Tan upholstered pads with foam wrapping over the side wings | |
| Cantilever frame | 25 mm chrome-plated bent steel tube in a polished mirror finish | |
| Frame wall thickness | 2.0 mm steel tube wall | |
| Floor glides | 4 non-marking polymer glides fitted at each rail endpoint | |
| Under-seat mounting plate | 3 mm powder-coated steel plate connecting shell to cantilever frame | |
| Seam construction | Single-needle stitched edge seams at 70 mm pitch between tack points | |
| Surface finish | Semi-matte tan upholstery with bright chrome metalwork |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever movement | The steel sled base allows controlled vertical flex of 15 mm without casters or swivel | |
|---|---|---|
| Back support function | High 610 mm back provides thoracic and shoulder support during upright meetings | |
| Integrated arm support | Wraparound fixed armrests support forearms at 690 mm above floor | |
| Non-swivel seating | The under-seat mount fixes the shell to the sled frame for stable visitor positioning | |
| Noise and floor protection | Four polymer glides reduce sliding noise and protect hard flooring | |
| Entry and exit | Open-front sled design has no front cross tube obstructing foot placement | |
| Cleaning access | 280 mm floor clearance permits vacuuming under the seat without moving the full chair | |
| Stacking compatibility | Non-stacking upholstered high-back design intended for stationary meeting rooms | |
| Upholstery maintenance | Smooth non-perforated surface supports wiping and periodic fabric-safe cleaning | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Inner packaging | 4-corner EPS protection, 0.08 mm PE bag, and 5-layer corrugated carton | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive meeting room | Place around boardroom tables where 460 mm seat height supports upright discussion seating | |
|---|---|---|
| Manager office visitor area | Position in front of a desk for guests seeking padded back and arm support | |
| Conference and training rooms | Use in fixed rows or clusters because the cantilever base has no casters or adjustable controls | |
| Hotel business lounge | Specify for quiet guest seating where tan upholstery and chrome create a refined visual standard | |
| Reception consultation zone | Deploy at low tables or reception desks for visitors staying 30 to 90 minutes | |
| Hard-floor corporate interiors | Use the four polymer glides on tile, timber, vinyl, or low-pile carpet without adding floor protectors | |
| Single-person workstation alternative | Suitable for temporary desk seating at 720 to 760 mm high standard work surfaces | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139:2013 Level 2 seating strength and durability | Specify Level 2 for non-domestic conference and visitor seating under repeated use | |
|---|---|---|
| EN 1022:2018 seating stability | Use front, side, and rear stability tests for the cantilever base | |
| EN 14465:2003 upholstery fabric performance | Require abrasion, colorfastness, and pilling reporting if textile upholstery is supplied |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 static load test | Specify 102 kg rated-load verification for general office seating acceptance | |
|---|---|---|
| ANSI/BIFMA X5.4-2020 lounge and public seating | Use where the chair is procured for public lobby rather than conference applications |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2024 dimensional structural integrity | Use for general wooden-furniture dimensional and structural inspection if the support shell is wood-based | |
|---|---|---|
| GB/T 10357.6 static furniture loading | Apply static-load test methods to verify the cantilever seat and back structure | |
| GB 28007-2011 furniture safety | Use for children-accessible public areas where edge and structural safety review is required |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2024 dimensional structural integrity: Use for general wooden-furniture dimensional and structural inspection if the support shell is wood-based; 2. GB/T 10357.6 static furniture loading: Apply static-load test methods to verify the cantilever seat and back structure; 3. GB 28007-2011 furniture safety: Use for children-accessible public areas where edge and structural safety review is required; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool