Upholstered High-Back Executive Guest Chair with Chrome Sled Base (model EXEC-SLED-HB-BRN) is listed under Bow Chair. Dimensions: 660 × 760 × 1120 mm. Materials: Brown upholstery with stitched pad faces; material grade not legible and requires supplier BOM confirmation. Load capacity: 120 kg. Product Features: High-back,chair,cantilever,sled,base,upholstered,executive,seating,integrated,armrests,fixed,visitor. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | EXEC-SLED-HB-BRN |
| Overall dimensions (W × D × H) | 660 × 760 × 1120 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Recommended user weight capacity | 160 kg |
| Net weight | 18 kg | Seating capacity | 1 person |
| Back static load reference | 120 kg | Seat impact durability reference | 100,000 cycles |
| Backrest fatigue durability reference | 100,000 cycles | Sled base vertical static load reference | 680 kg |
| Floor glide contact count | 4 glides | Color options | 1 visible tan-brown color |
| Warranty reference | 5 years | Seat upholstery | Brown upholstery with stitched pad faces; material grade not legible and requires supplier BOM confirmation |
| Back upholstery | Brown padded upholstery over a wraparound high-back shell with two horizontal seam zones | Armrest upholstery | Integrated brown padded arm bolsters continuous with seat and back side panels |
| Cushion foam | Molded polyurethane seat foam, 100 mm thick, with procurement density target 45 kg/m3 | Back padding | Polyurethane back foam, 80 mm thick, with procurement density target 35 kg/m3 |
| Internal seat support | 12 mm molded structural board or steel-reinforced plywood seat carrier under foam | Back inner frame | 20 mm molded board or welded steel-reinforced back former inside upholstered shell |
| Sled frame | 25 mm diameter chrome-plated steel tube bent into twin cantilever loops | Tube wall thickness | 1.5 mm chrome-plated steel wall thickness for commercial sled-frame service |
| Frame finish | Polished chrome plating over steel, target 0.25 mm decorative chromium system | Floor glides | Four non-marking polymer glides fitted to the lower sled rails |
| Seam construction | Stitched horizontal back panels with 80 mm seam pitch target | Movement type | Fixed cantilever sled chair without swivel, casters, or gas lift |
| Cantilever flex | Controlled fore-aft flex through the twin chrome tube loops, rated for 160 kg users | Arm support | Continuous fixed padded armrests support forearms at 670 mm above floor |
| Back support | High segmented back provides shoulder and lumbar contact zones in a fixed upright posture | Floor protection | Four polymer contact glides reduce floor marking and permit short repositioning slides |
| Entry and exit | Sled design has no front crossbar obstruction and provides 300 mm under-seat kneespace | Stackability | Non-stacking single chair due to high upholstered wraparound shell |
| Reclining function | No recline mechanism or tilt lock; back angle is fixed at 100 degrees | Height adjustment | No seat-height adjustment; fixed 450 mm seat height for meeting-table use |
| Assembly method | Frame-fastened upholstered body using 8 M8 bolts or threaded inserts for delivery and maintenance | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Executive office visitor use | Position in front of an executive desk at 450 mm seat height for meetings and brief consultations | Boardroom and meeting room | Use around conference tables where quiet glide movement and uniform tan-brown upholstery are required |
| Reception and guest lounge | Place in reception zones offering padded high-back support without casters | Manager workstation return | Pair with a desk side-return for temporary guest seating during reviews |
| Hotel business center | Specify for business lounges needing chrome durability and soft-upholstered guest seating | Healthcare administrative office | Use in consultation offices where a stable fixed-base chair is preferred over task seating |
| Recommended floor surfaces | Suitable for hard floors and low-pile carpet with non-marking polymer glides | Recommended table height | Pair with 750 mm meeting or executive desks |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 760 × 1120 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 160 kg | |
|---|---|---|
| Net weight | 18 kg | |
| Seating capacity | 1 person | |
| Back static load reference | 120 kg | |
| Seat impact durability reference | 100,000 cycles | |
| Backrest fatigue durability reference | 100,000 cycles | |
| Sled base vertical static load reference | 680 kg | |
| Floor glide contact count | 4 glides | |
| Color options | 1 visible tan-brown color | |
| Warranty reference | 5 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Brown upholstery with stitched pad faces; material grade not legible and requires supplier BOM confirmation | |
|---|---|---|
| Back upholstery | Brown padded upholstery over a wraparound high-back shell with two horizontal seam zones | |
| Armrest upholstery | Integrated brown padded arm bolsters continuous with seat and back side panels | |
| Cushion foam | Molded polyurethane seat foam, 100 mm thick, with procurement density target 45 kg/m3 | |
| Back padding | Polyurethane back foam, 80 mm thick, with procurement density target 35 kg/m3 | |
| Internal seat support | 12 mm molded structural board or steel-reinforced plywood seat carrier under foam | |
| Back inner frame | 20 mm molded board or welded steel-reinforced back former inside upholstered shell | |
| Sled frame | 25 mm diameter chrome-plated steel tube bent into twin cantilever loops | |
| Tube wall thickness | 1.5 mm chrome-plated steel wall thickness for commercial sled-frame service | |
| Frame finish | Polished chrome plating over steel, target 0.25 mm decorative chromium system | |
| Floor glides | Four non-marking polymer glides fitted to the lower sled rails | |
| Seam construction | Stitched horizontal back panels with 80 mm seam pitch target |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Movement type | Fixed cantilever sled chair without swivel, casters, or gas lift | |
|---|---|---|
| Cantilever flex | Controlled fore-aft flex through the twin chrome tube loops, rated for 160 kg users | |
| Arm support | Continuous fixed padded armrests support forearms at 670 mm above floor | |
| Back support | High segmented back provides shoulder and lumbar contact zones in a fixed upright posture | |
| Floor protection | Four polymer contact glides reduce floor marking and permit short repositioning slides | |
| Entry and exit | Sled design has no front crossbar obstruction and provides 300 mm under-seat kneespace | |
| Stackability | Non-stacking single chair due to high upholstered wraparound shell | |
| Reclining function | No recline mechanism or tilt lock; back angle is fixed at 100 degrees | |
| Height adjustment | No seat-height adjustment; fixed 450 mm seat height for meeting-table use | |
| Assembly method | Frame-fastened upholstered body using 8 M8 bolts or threaded inserts for delivery and maintenance | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office visitor use | Position in front of an executive desk at 450 mm seat height for meetings and brief consultations | |
|---|---|---|
| Boardroom and meeting room | Use around conference tables where quiet glide movement and uniform tan-brown upholstery are required | |
| Reception and guest lounge | Place in reception zones offering padded high-back support without casters | |
| Manager workstation return | Pair with a desk side-return for temporary guest seating during reviews | |
| Hotel business center | Specify for business lounges needing chrome durability and soft-upholstered guest seating | |
| Healthcare administrative office | Use in consultation offices where a stable fixed-base chair is preferred over task seating | |
| Recommended floor surfaces | Suitable for hard floors and low-pile carpet with non-marking polymer glides | |
| Recommended table height | Pair with 750 mm meeting or executive desks |
EU Market Access Requirements* EN Standards
| EN 16139 applicability | Applicable standards and test results require confirmation | |
|---|---|---|
| EN 1022 applicability | Chair stability test method for determining front, rear, and sideways overturning behavior | |
| EN 14465 applicability | Upholstery fabric abrasion, pilling, and colorfastness assessment if textile upholstery is supplied |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 applicability | Lounge and public-office seating strength and durability reference for fixed visitor chairs |
|---|
Standards applicable to China-market projects
| GB/T 10357.2 applicability | Furniture mechanical test for chair and stool strength, suitable for static-load acceptance | |
|---|---|---|
| GB/T 10357.3 applicability | Furniture durability test for chair and stool back and seat loading, suitable for cyclic validation |
This product must meet the following technical requirements: 1. GB/T 10357.2 applicability: Furniture mechanical test for chair and stool strength, suitable for static-load acceptance; 2. GB/T 10357.3 applicability: Furniture durability test for chair and stool back and seat loading, suitable for cyclic validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp