纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 760 × 1120 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Net weight	18 kg
Seating capacity	1 person
Back static load reference	120 kg
Seat impact durability reference	100,000 cycles
Backrest fatigue durability reference	100,000 cycles
Sled base vertical static load reference	680 kg
Floor glide contact count	4 glides
Color options	1 visible tan-brown color
Warranty reference	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Brown upholstery with stitched pad faces; material grade not legible and requires supplier BOM confirmation
Back upholstery	Brown padded upholstery over a wraparound high-back shell with two horizontal seam zones
Armrest upholstery	Integrated brown padded arm bolsters continuous with seat and back side panels
Cushion foam	Molded polyurethane seat foam, 100 mm thick, with procurement density target 45 kg/m3
Back padding	Polyurethane back foam, 80 mm thick, with procurement density target 35 kg/m3
Internal seat support	12 mm molded structural board or steel-reinforced plywood seat carrier under foam
Back inner frame	20 mm molded board or welded steel-reinforced back former inside upholstered shell
Sled frame	25 mm diameter chrome-plated steel tube bent into twin cantilever loops
Tube wall thickness	1.5 mm chrome-plated steel wall thickness for commercial sled-frame service
Frame finish	Polished chrome plating over steel, target 0.25 mm decorative chromium system
Floor glides	Four non-marking polymer glides fitted to the lower sled rails
Seam construction	Stitched horizontal back panels with 80 mm seam pitch target

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Movement type	Fixed cantilever sled chair without swivel, casters, or gas lift
Cantilever flex	Controlled fore-aft flex through the twin chrome tube loops, rated for 160 kg users
Arm support	Continuous fixed padded armrests support forearms at 670 mm above floor
Back support	High segmented back provides shoulder and lumbar contact zones in a fixed upright posture
Floor protection	Four polymer contact glides reduce floor marking and permit short repositioning slides
Entry and exit	Sled design has no front crossbar obstruction and provides 300 mm under-seat kneespace
Stackability	Non-stacking single chair due to high upholstered wraparound shell
Reclining function	No recline mechanism or tilt lock; back angle is fixed at 100 degrees
Height adjustment	No seat-height adjustment; fixed 450 mm seat height for meeting-table use
Assembly method	Frame-fastened upholstered body using 8 M8 bolts or threaded inserts for delivery and maintenance
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office visitor use	Position in front of an executive desk at 450 mm seat height for meetings and brief consultations
Boardroom and meeting room	Use around conference tables where quiet glide movement and uniform tan-brown upholstery are required
Reception and guest lounge	Place in reception zones offering padded high-back support without casters
Manager workstation return	Pair with a desk side-return for temporary guest seating during reviews
Hotel business center	Specify for business lounges needing chrome durability and soft-upholstered guest seating
Healthcare administrative office	Use in consultation offices where a stable fixed-base chair is preferred over task seating
Recommended floor surfaces	Suitable for hard floors and low-pile carpet with non-marking polymer glides
Recommended table height	Pair with 750 mm meeting or executive desks

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Applicable standards and test results require confirmation
EN 1022 applicability	Chair stability test method for determining front, rear, and sideways overturning behavior
EN 14465 applicability	Upholstery fabric abrasion, pilling, and colorfastness assessment if textile upholstery is supplied

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4 applicability	Lounge and public-office seating strength and durability reference for fixed visitor chairs

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Furniture mechanical test for chair and stool strength, suitable for static-load acceptance
GB/T 10357.3 applicability	Furniture durability test for chair and stool back and seat loading, suitable for cyclic validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Furniture mechanical test for chair and stool strength, suitable for static-load acceptance；
2. GB/T 10357.3 applicability：Furniture durability test for chair and stool back and seat loading, suitable for cyclic validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-SLED-HB-BRN

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-SLED-HB-BRN

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-SLED-HB-BRN打开导出工具

页面快速操作

发布采购询价

产品描述

The Upholstered High-Back Executive Guest Chair with Chrome Sled Base, model EXEC-SLED-HB-BRN, presents a formal visitor seating solution with a tall wraparound back, integrated armrests, and a polished chrome cantilever frame. Its brown upholstery uses stitched pad faces on the seat and two horizontal seam zones on the back, creating a structured, executive appearance. The padded arm bolsters flow continuously from the seat into the back side panels, giving the chair a unified silhouette. The twin chrome sled loops create an open base and a clean visual profile suited to offices, conference areas, and reception settings. Overall dimensions are 660 by 760 by 1120 millimeters, with 540 millimeters of clear width between the armrests. The seat cushion has a finished thickness of 90 millimeters, while the backrest padding is 70 millimeters thick and includes a 240 millimeter lumbar support zone. Construction uses molded polyurethane seat foam over a 12 millimeter molded structural board or steel-reinforced plywood carrier. The back contains polyurethane padding over a 20 millimeter molded board or welded steel-reinforced former. Procurement targets call for seat foam density of 45 kilograms per cubic meter and back foam density of 35 kilograms per cubic meter. The frame is formed from 25 millimeter diameter chrome-plated steel tube with 1.5 millimeter wall thickness, bent into twin cantilever loops. Upholstery material grade is not legible in the available record and should be confirmed through the supplier bill of materials before purchase. Functionally, this is a fixed chair without swivel, casters, or gas lift. The sled frame provides controlled fore-and-aft flex and is rated for users weighing up to 160 kilograms. The high segmented back supports the shoulders and lumbar region in an upright posture, while the continuous fixed armrests support the forearms 670 millimeters above the floor. Four polymer contact glides reduce floor marking and allow short repositioning slides. The absence of a front crossbar provides 300 millimeters of under-seat kneespace, and the high wraparound upholstered shell means the chair is non-stacking. Reference durability values include a 120 kilogram back static load, 680 kilogram sled-base vertical static load, and 100,000-cycle seat impact and backrest fatigue ratings. Appropriate placements include executive offices, boardrooms, meeting rooms, reception and guest lounges, manager workstation returns, hotel business centers, and healthcare administrative offices. The chair is intended for one occupant and has a net weight of 18 kilograms. It ships as one set in two cartons, with packaged gross weight of 23 kilograms, carton dimensions of 850 by 420 by 720 millimeters, and carton volume of 0.26 cubic meter per set. Reference assembly time is 40 minutes per set, and an indicative 20-foot container loads 135 sets at 85 percent space utilization. Buyers should confirm upholstery grade, component standards, finish consistency, glide type, and assembly hardware before project release.

Upholstered High-Back Executive Guest Chair with Chrome Sled Base Specifications

供应商与现货