Product supplierTan Upholstered Cantilever Conference Chair with Chrome Sled Frame, Tan leather-look upholstered surface with stitched padded front edge
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 600 × 640 × 980 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 14 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Maximum occupancy | 1 person | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam indentation recovery | 35 percent | |
| Upholstery abrasion acceptance value | 50,000 Martindale cycles | |
| Seam stitch pitch | 8 stitches per 50 mm | |
| Cantilever flex fatigue acceptance | 100,000 loading cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Tan leather-look upholstered surface with stitched padded front edge | |
|---|---|---|
| Back upholstery | Tan continuous padded back cover with contoured side wraps and horizontal lumbar seam | |
| Seat cushion | Padded foam core 70 mm thick over a supporting seat board | |
| Back padding | 40 mm thick foam layer on a formed back panel | |
| Arm pads | Tan upholstered fixed pads following the curved chrome support tube | |
| Cantilever frame | Polished chrome-plated welded steel tube, 25 mm diameter and 1.5 mm wall thickness | |
| Internal seat support | 12 mm thick molded board or steel seat pan secured to the tubular frame | |
| Back inner support | 10 mm thick formed board or steel reinforcing panel inside the upholstered back | |
| Floor glides | 4 black non-marking polymer pads bonded to the runner ends | |
| Frame finish | Mirror polished chrome surface over welded steel tube | |
| Joint construction | Continuous bent side tubes linked by front and rear cross-welded rails | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cantilever movement | Fixed sled base provides controlled vertical flex without casters, swivel, or height adjustment | |
|---|---|---|
| Arm support | Fixed padded arms provide forearm support at 690 mm floor height and cannot be raised or rotated | |
| Back support | Medium-height fixed back provides shoulder and lumbar support at a 100-degree reclined angle | |
| Floor protection | Four replaceable polymer glides distribute load and reduce scratching on hard floors | |
| Stacking limitation | Not specified as a stacking chair due to fully enclosed arm-and-sled geometry | |
| Entry and exit | Open front and armless front edge allow side and frontal access at a 460 mm seat height | |
| Rocking resistance | Four-point runner footprint and 640 mm depth resist forward and rearward tipping | |
| Maintenance access | Upholstery is fixed to the frame; glides can be replaced and covers require on-chair cleaning | |
| Adjustment count | 0 user adjustments, with fixed seat height, back angle, arm height, and base position | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton dimensions | 780 x 660 x 560 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference room | Place around boardroom or meeting tables where a fixed 460 mm seat height supports standard desk surfaces | |
|---|---|---|
| Executive visitor seating | Use in front of desks for guests with padded arms, tan upholstery, and a polished chrome appearance | |
| Reception area | Pair two or more chairs with low tables in waiting zones requiring quiet, non-castered seating | |
| Training or interview room | Deploy in rooms needing durable side-access seating without adjustment complexity | |
| Open-plan touch-down spaces | Use for short meetings beside workbenches or collaboration surfaces | |
| Hotel meeting suites | Specify with hard-floor glides and abrasion-tested upholstery for frequent guest turnover | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139:2013+AC:2013 strength, durability, safety for non-domestic seating | Applies to conference and visitor chair strength and stability requirements | |
|---|---|---|
| EN 1022:2018 seating stability determination | Recommended test basis for forward, rearward, and side overturning resistance | |
| EN 1728:2012 seating test methods for strength and durability | Use as the mechanical test-method standard alongside EN 16139 acceptance criteria | |
| EN 12520:2015 contact surface upholstery hardware assessment | Useful for upholstered surfaces where hardware, seams, and accessible edges are inspected |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 static load test acceptance target | Use 1,020 kg back test and 1,134 kg seat static load as procurement validation values |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2024 wooden furniture general technical requirements | Use for dimensional, workmanship, and inspection requirements if hidden boards or wood-based panels are used | |
|---|---|---|
| GB/T 3325-2017 metal furniture general technical requirements | Applicable to inspection of the welded and chrome-plated steel cantilever frame | |
| GB 18584-2001 indoor wooden furniture materials limit | Recommended acceptance basis for formaldehyde emission from any hidden wood-based panels | |
| GB/T 10357.3-2013 furniture mechanical tests for seating strength and durability | Use for static, impact, and fatigue validation before bulk purchase |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2024 wooden furniture general technical requirements: Use for dimensional, workmanship, and inspection requirements if hidden boards or wood-based panels are used; 2. GB/T 3325-2017 metal furniture general technical requirements: Applicable to inspection of the welded and chrome-plated steel cantilever frame; 3. GB 18584-2001 indoor wooden furniture materials limit: Recommended acceptance basis for formaldehyde emission from any hidden wood-based panels; 4. GB/T 10357.3-2013 furniture mechanical tests for seating strength and durability: Use for static, impact, and fatigue validation before bulk purchase; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool