Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 650 × 1000 mm
Backrest height	550 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	14 kg
Rated user weight	160 kg
Recommended user height range	1850 mm
Seating capacity	1 person
Back static load acceptance target	160 kg
Arm downward load acceptance target	68 kg per arm
Frame cyclic durability target	120000 cycles
Floor glide contact area	4 pads
Stacking capacity	0 chairs
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat and back facing	Black faux leather upholstery over padded panels
Upholstery thickness	1.2 mm
Seat foam	Moulded polyurethane cushion with 80 mm visible padded profile
Back foam	Polyurethane padding with segmented horizontal face panels
Foam density target	38 kg/m3 seat and 32 kg/m3 back
Foam rebound target	40 percent
Internal seat support	12 mm plywood or steel-reinforced composite seat board
Back support core	1.2 mm steel inner reinforcement panel
Cantilever frame	Chrome-plated welded steel tube with 25 mm diameter and 1.5 mm target wall
Arm supports	Continuous chrome tubular supports with black padded top rails
Arm pad material	Black polyurethane or faux-leather-covered padding over steel support
Floor glides	Four black non-marking polymer caps at runner ends

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Height adjustment	No height adjustment; fixed 460 mm seat height on a welded cantilever base
Swivel function	Non-swivelling fixed seat attached to the twin-runner frame
Back recline	Fixed back angle at 100 degrees from horizontal
Tilt lock positions	0 recline lock positions
Cantilever movement	Controlled vertical flex through the chrome twin-tube sled frame
Arm support	Fixed loop arms supporting entry, exit, and seated elbow support
Floor protection	Four polymer glide caps isolate chrome runner ends from hard floors
Back support zones	Two horizontally segmented padded zones for upper-back and lumbar contact
Cleaning access	Open sled base with no casters or enclosed under-seat cabinet
Seat restraint	Fixed upholstered seat mounted to the tubular support frame
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Gross weight per carton	17 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Meeting room	Fixed non-rolling chair for conference tables where a uniform black and chrome appearance is required
Reception area	Guest seating beside desks or in waiting zones with hard floors
Executive office visitor position	Formal guest chair facing an executive desk
Training room	Side-by-side seating for seminars and internal presentations
Government or corporate boardroom	Coordinated black seating for standardized procurement across multiple rooms
Open-plan workstation consultation	Temporary visitor seating beside staff workstations
Hard-floor interiors	Suitable for tile, sealed wood, vinyl, and low-pile carpet when glides are retained
Not recommended for task work	No swivel, casters, height adjustment, or recline mechanism, so it is not a substitute for an ergonomic task chair.

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139	Strength, durability, and safety requirements for non-domestic seating
EN 1022	Determination of stability for domestic and non-domestic seating
EN 13501-1	Reaction-to-fire classification for upholstered furniture materials if fire-rated fabric or filling is specified

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.2	Applicable standards and test results require confirmation
GB/T 10357.3	Test method for chair and stool strength and durability
GB 18584	Indoor decorative wood-based furniture limit for formaldehyde emission

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.2: Applicable standards and test results require confirmation;
2. GB/T 10357.3: Test method for chair and stool strength and durability;
3. GB 18584: Indoor decorative wood-based furniture limit for formaldehyde emission;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OB-SLED-BK-CR-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OB-SLED-BK-CR-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OB-SLED-BK-CR-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Black Faux Leather Sled-Base Visitor Chair with Chrome Armrests is a formal office visitor and conference chair designed for coordinated meeting, reception, and administrative seating. Model OB-SLED-BK-CR-01 is unbranded and presents a consistent black and chrome appearance with a padded mid-back profile, fixed loop arms, and a polished twin-tube cantilever frame. Its visual form is defined by black faux leather upholstery over padded seat and back panels. The back uses segmented horizontal face detailing and includes a defined lumbar support zone, while the fixed arms combine polished chrome supports with black arm pads. The sled frame creates a clean, non-rolling silhouette with twin runners and four polymer glide caps that lift the metal runner ends away from hard floor surfaces. Construction balances cushioned contact surfaces with a supportive internal structure. The seat features moulded polyurethane foam with a visible padded profile, an internal plywood or steel-reinforced composite seat board, and black faux leather upholstery. The back combines polyurethane padding with a steel inner reinforcement panel. The welded chrome-plated steel tubular frame is paired with black arm pads and polymer floor glides. The chair has a fixed seat height, does not swivel, and uses a fixed back angle. Its cantilever structure allows controlled vertical flex, and the fixed loop arms assist with entry and exit while providing elbow support during meetings. This one-person chair is suited to conference tables, reception waiting zones, executive office guest positions, training rooms, corporate or government boardrooms, and temporary visitor seating beside open-plan workstations. Its unified finish is particularly appropriate where multiple rooms require standardized seating and a consistent professional aesthetic. For procurement, specify the fixed-height, non-reclining design rather than a task chair, and confirm that assembly and delivery planning allow for the packaged configuration and stated assembly time. Buyers should also review fixed seat dimensions, arm clearance, back height, weight capacity, flooring compatibility, and the need for matching visitor chairs across larger meeting or boardroom installations.

Black Faux Leather Sled-Base Visitor Chair with Chrome Armrests Specifications

Suppliers and stock