纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 650 × 1000 mm
Backrest height	550 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	14 kg
Rated user weight	160 kg
Recommended user height range	1850 mm
Seating capacity	1 person
Back static load acceptance target	160 kg
Arm downward load acceptance target	68 kg per arm
Frame cyclic durability target	120000 cycles
Floor glide contact area	4 pads
Stacking capacity	0 chairs
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back facing	Black faux leather upholstery over padded panels
Upholstery thickness	1.2 mm
Seat foam	Moulded polyurethane cushion with 80 mm visible padded profile
Back foam	Polyurethane padding with segmented horizontal face panels
Foam density target	38 kg/m3 seat and 32 kg/m3 back
Foam rebound target	40 percent
Internal seat support	12 mm plywood or steel-reinforced composite seat board
Back support core	1.2 mm steel inner reinforcement panel
Cantilever frame	Chrome-plated welded steel tube with 25 mm diameter and 1.5 mm target wall
Arm supports	Continuous chrome tubular supports with black padded top rails
Arm pad material	Black polyurethane or faux-leather-covered padding over steel support
Floor glides	Four black non-marking polymer caps at runner ends

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Height adjustment	No height adjustment; fixed 460 mm seat height on a welded cantilever base
Swivel function	Non-swivelling fixed seat attached to the twin-runner frame
Back recline	Fixed back angle at 100 degrees from horizontal
Tilt lock positions	0 recline lock positions
Cantilever movement	Controlled vertical flex through the chrome twin-tube sled frame
Arm support	Fixed loop arms supporting entry, exit, and seated elbow support
Floor protection	Four polymer glide caps isolate chrome runner ends from hard floors
Back support zones	Two horizontally segmented padded zones for upper-back and lumbar contact
Cleaning access	Open sled base with no casters or enclosed under-seat cabinet
Seat restraint	Fixed upholstered seat mounted to the tubular support frame
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Gross weight per carton	17 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Meeting room	Fixed non-rolling chair for conference tables where a uniform black and chrome appearance is required
Reception area	Guest seating beside desks or in waiting zones with hard floors
Executive office visitor position	Formal guest chair facing an executive desk
Training room	Side-by-side seating for seminars and internal presentations
Government or corporate boardroom	Coordinated black seating for standardized procurement across multiple rooms
Open-plan workstation consultation	Temporary visitor seating beside staff workstations
Hard-floor interiors	Suitable for tile, sealed wood, vinyl, and low-pile carpet when glides are retained
Not recommended for task work	No swivel, casters, height adjustment, or recline mechanism, so it is not a substitute for an ergonomic task chair.

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139	Strength, durability, and safety requirements for non-domestic seating
EN 1022	Determination of stability for domestic and non-domestic seating
EN 13501-1	Reaction-to-fire classification for upholstered furniture materials if fire-rated fabric or filling is specified

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2	Applicable standards and test results require confirmation
GB/T 10357.3	Test method for chair and stool strength and durability
GB 18584	Indoor decorative wood-based furniture limit for formaldehyde emission

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2：Applicable standards and test results require confirmation；
2. GB/T 10357.3：Test method for chair and stool strength and durability；
3. GB 18584：Indoor decorative wood-based furniture limit for formaldehyde emission；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OB-SLED-BK-CR-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OB-SLED-BK-CR-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OB-SLED-BK-CR-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Faux Leather Sled-Base Visitor Chair with Chrome Armrests is a formal office visitor and conference chair designed for coordinated meeting, reception, and administrative seating. Model OB-SLED-BK-CR-01 is unbranded and presents a consistent black and chrome appearance with a padded mid-back profile, fixed loop arms, and a polished twin-tube cantilever frame. Its visual form is defined by black faux leather upholstery over padded seat and back panels. The back uses segmented horizontal face detailing and includes a defined lumbar support zone, while the fixed arms combine polished chrome supports with black arm pads. The sled frame creates a clean, non-rolling silhouette with twin runners and four polymer glide caps that lift the metal runner ends away from hard floor surfaces. Construction balances cushioned contact surfaces with a supportive internal structure. The seat features moulded polyurethane foam with a visible padded profile, an internal plywood or steel-reinforced composite seat board, and black faux leather upholstery. The back combines polyurethane padding with a steel inner reinforcement panel. The welded chrome-plated steel tubular frame is paired with black arm pads and polymer floor glides. The chair has a fixed seat height, does not swivel, and uses a fixed back angle. Its cantilever structure allows controlled vertical flex, and the fixed loop arms assist with entry and exit while providing elbow support during meetings. This one-person chair is suited to conference tables, reception waiting zones, executive office guest positions, training rooms, corporate or government boardrooms, and temporary visitor seating beside open-plan workstations. Its unified finish is particularly appropriate where multiple rooms require standardized seating and a consistent professional aesthetic. For procurement, specify the fixed-height, non-reclining design rather than a task chair, and confirm that assembly and delivery planning allow for the packaged configuration and stated assembly time. Buyers should also review fixed seat dimensions, arm clearance, back height, weight capacity, flooring compatibility, and the need for matching visitor chairs across larger meeting or boardroom installations.

Black Faux Leather Sled-Base Visitor Chair with Chrome Armrests Specifications

供应商与现货