纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	640 × 700 × 1120 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight capacity	160 kg
Recommended user height range	190 cm
Seating capacity	1 person
Cantilever static load acceptance target	320 kg
Backrest cyclic durability target	120,000 cycles
Floor glide compression capacity	80 kg per glide
Recommended warranty period	5 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather-look upholstery over padded cushion, material grade requiring supplier BOM confirmation
Back upholstery	Tan padded upholstered panel with stitched perimeter and horizontal dividing seam
Armrest padding	Tan upholstered continuous arm pads connected to the back shell
Side accent panels	Dark brown or black rigid polymer/wood-composite panels below the arm supports
Seat support shell	Molded rigid load-bearing seat shell with an 8 mm engineering target
Internal back support	Rigid board or formed plywood panel with a 9 mm engineering target
Cushion foam	Molded polyurethane foam, seat density target 45 kg/m3 and back density target 35 kg/m3
Cantilever frame	Chrome-plated steel tube, 25 mm diameter and 1.5 mm wall thickness target
Floor glides	Four black non-marking polymer glides fitted at runner ends
Upholstery seam construction	Stitched horizontal seat-back seam with 6 mm target stitch pitch
Surface finish	Polished chrome plating on exposed steel, with a smooth semi-gloss upholstery face
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed cantilever movement	Continuous steel runners provide limited vertical flex without swivel, tilt, or height adjustment
Back support mode	Tall connected backrest provides upper-back and shoulder support for upright meeting posture
Arm support	Integrated fixed armrests provide forearm support at 670 mm above floor and no width adjustment
Entry and exit	Open-front sled frame allows side access with 600 mm runner clearance
Floor protection	Four replaceable polymer glides isolate chrome tube ends from hard floors
Stacking capability	Non-stacking single chair; the tall upholstered back and enclosed arm shell do not show stacking geometry
Swivel function	No swivel bearing is present; the seat is fixed to the cantilever frame
Tilt and lock function	No tilt mechanism or recline lock; back angle is fixed by the upholstered shell and frame
Height adjustment	No gas lift; fixed 450 mm seat height is set by the cantilever base
Movement method	Floor glides allow short repositioning on hard floors but no caster mobility
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Boardroom seating	Use around fixed conference tables where a 450 mm seat height and quiet glides support long meetings
Executive visitor seating	Place in front of executive desks for clients or visiting managers
Meeting room rows	Deploy in rows or around modular tables; the non-caster base reduces unintended movement
Private office consultation	Use as a guest chair beside a desk or in a two-chair consultation setting
Hotel meeting suites	Specify for conference centers and club lounges needing durable adult visitor seating
Reception interview area	Pair two chairs with a low table for structured guest conversations
Hard-floor interiors	Recommended for wood, tile, vinyl, and sealed concrete floors with the four polymer glides
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Strength, durability, and safety reference for non-domestic seating such as conference chairs
EN 1022 applicability	Stability test reference for a fixed four-contact-point visitor chair
EN 12521 applicability	Domestic furniture safety, strength, and durability requirements may be used only for residential versions

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Furniture mechanical surface test for chair seat and back durability in commercial indoor use
GB/T 10357.3 applicability	Chair strength and durability test for static, impact, and fatigue loading

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Furniture mechanical surface test for chair seat and back durability in commercial indoor use；
2. GB/T 10357.3 applicability：Chair strength and durability test for static, impact, and fatigue loading；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · HB-CANT-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · HB-CANT-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · HB-CANT-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Upholstered Conference Chair with Chrome Cantilever Base is an unbranded conference and visitor chair, model HB-CANT-TAN-01. Its formal, coordinated appearance features a tan upholstered seat and tall back, continuous upholstered arm pads, and dark rigid side panels set against a polished chrome-plated cantilever frame. The back is a padded panel with a stitched perimeter and a horizontal dividing seam, while the integrated armrests connect visually and structurally to the back shell for an enclosed, executive-style profile. The sled-style steel runners give the chair a clean, linear base suited to boardrooms, private offices, and organized meeting areas. Construction centers on a molded rigid load-bearing seat shell with an 8 mm engineering target and a rigid board or formed plywood internal back support with a 9 mm engineering target. Cushioning uses molded polyurethane foam, with a 45 kg/m3 seat-density target and 35 kg/m3 back-density target. The finished seat cushion is 90 mm thick, backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. The tan leather-look upholstery grade requires supplier bill-of-materials confirmation. Below the arm supports, dark brown or black rigid polymer or wood-composite panels provide a structured side accent. The chrome-plated steel tube frame has a 25 mm diameter and 1.5 mm wall thickness target. Continuous runners create limited vertical flex, with no swivel, tilt, caster movement, or height adjustment. Four black non-marking polymer glides fit the runner ends and can be replaced to protect hard floors. The fixed armrests support forearms at 670 mm above floor level, with 540 mm of clear width between them and no width adjustment. An open front provides 600 mm of runner clearance for side access. The chair is non-stacking and intended for one adult user, with a 160 kg recommended user weight capacity and suitability for users up to 190 cm in height. Additional engineering targets include 320 kg cantilever static load acceptance, 120,000 backrest cycles, and 80 kg compression capacity per glide.

High-Back Upholstered Conference Chair with Chrome Cantilever Base Specifications

供应商与现货