纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 640 × 1020 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight capacity	160 kg
Seat foam thickness	80 mm
Back foam thickness	60 mm
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rate	40%
Recommended daily occupancy	8 hours
Seating capacity	1 person
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer seat and back upholstery	Tan leather-look upholstery with tightly tailored plain face and raised side seams
Upholstery substrate	1.2 mm minimum composite upholstery layer over foam
Seat cushion	80 mm high-resilience polyurethane foam on a load-bearing seat board
Back cushion	60 mm shaped polyurethane foam bonded to the contoured inner back panel
Inner support shell	12 mm molded structural composite board forming seat and back carrier
Integrated arm pads	Tan upholstered pads with foam wrapping over the side wings
Cantilever frame	25 mm chrome-plated bent steel tube in a polished mirror finish
Frame wall thickness	2.0 mm steel tube wall
Floor glides	4 non-marking polymer glides fitted at each rail endpoint
Under-seat mounting plate	3 mm powder-coated steel plate connecting shell to cantilever frame
Seam construction	Single-needle stitched edge seams at 70 mm pitch between tack points
Surface finish	Semi-matte tan upholstery with bright chrome metalwork

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed cantilever movement	The steel sled base allows controlled vertical flex of 15 mm without casters or swivel
Back support function	High 610 mm back provides thoracic and shoulder support during upright meetings
Integrated arm support	Wraparound fixed armrests support forearms at 690 mm above floor
Non-swivel seating	The under-seat mount fixes the shell to the sled frame for stable visitor positioning
Noise and floor protection	Four polymer glides reduce sliding noise and protect hard flooring
Entry and exit	Open-front sled design has no front cross tube obstructing foot placement
Cleaning access	280 mm floor clearance permits vacuuming under the seat without moving the full chair
Stacking compatibility	Non-stacking upholstered high-back design intended for stationary meeting rooms
Upholstery maintenance	Smooth non-perforated surface supports wiping and periodic fabric-safe cleaning
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Inner packaging	4-corner EPS protection, 0.08 mm PE bag, and 5-layer corrugated carton
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive meeting room	Place around boardroom tables where 460 mm seat height supports upright discussion seating
Manager office visitor area	Position in front of a desk for guests seeking padded back and arm support
Conference and training rooms	Use in fixed rows or clusters because the cantilever base has no casters or adjustable controls
Hotel business lounge	Specify for quiet guest seating where tan upholstery and chrome create a refined visual standard
Reception consultation zone	Deploy at low tables or reception desks for visitors staying 30 to 90 minutes
Hard-floor corporate interiors	Use the four polymer glides on tile, timber, vinyl, or low-pile carpet without adding floor protectors
Single-person workstation alternative	Suitable for temporary desk seating at 720 to 760 mm high standard work surfaces
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013 Level 2 seating strength and durability	Specify Level 2 for non-domestic conference and visitor seating under repeated use
EN 1022:2018 seating stability	Use front, side, and rear stability tests for the cantilever base
EN 14465:2003 upholstery fabric performance	Require abrasion, colorfastness, and pilling reporting if textile upholstery is supplied

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 static load test	Specify 102 kg rated-load verification for general office seating acceptance
ANSI/BIFMA X5.4-2020 lounge and public seating	Use where the chair is procured for public lobby rather than conference applications

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 dimensional structural integrity	Use for general wooden-furniture dimensional and structural inspection if the support shell is wood-based
GB/T 10357.6 static furniture loading	Apply static-load test methods to verify the cantilever seat and back structure
GB 28007-2011 furniture safety	Use for children-accessible public areas where edge and structural safety review is required

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 dimensional structural integrity：Use for general wooden-furniture dimensional and structural inspection if the support shell is wood-based；
2. GB/T 10357.6 static furniture loading：Apply static-load test methods to verify the cantilever seat and back structure；
3. GB 28007-2011 furniture safety：Use for children-accessible public areas where edge and structural safety review is required；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CVC-TAN-680-640-1020

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CVC-TAN-680-640-1020

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CVC-TAN-680-640-1020打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Upholstered Cantilever Conference Armchair presents a structured high-back profile with tan leather-look upholstery, tailored plain faces, raised side seams, and a polished chrome sled frame. Its integrated wraparound armrests continue the tan upholstered appearance and create a coherent meeting-room silhouette. The chair measures 680 by 640 by 1020 mm, with a 540 mm clear width between the armrests, while the open-front cantilever leaves foot placement unobstructed. The fixed under-seat mount gives a stable, non-swivel layout suited to orderly boardrooms, visitor positions, training rows, and lounge clusters. Construction centers on a 12 mm molded structural composite board that forms the seat and back carrier. The seat uses an 80 mm high-resilience polyurethane cushion on a load-bearing board, and the back uses 60 mm shaped polyurethane foam bonded to a contoured inner panel. Finished cushion thickness is 90 mm for the seat and 70 mm for the back, with foam densities of 45 kg/m3 and 35 kg/m3 respectively, and a 40 percent rebound rate. A 1.2 mm minimum composite upholstery layer sits over the foam. The support system includes a 240 mm lumbar zone and a 610 mm high back intended to assist thoracic and shoulder support during upright meetings. The frame is made from 25 mm chrome-plated bent steel tube with a 2.0 mm wall and polished mirror finish. Its cantilever action permits controlled 15 mm vertical flex without casters or swivel movement. Armrests support the forearms at 690 mm above the floor, and four non-marking polymer glides at the rail endpoints reduce sliding noise and help protect tile, timber, vinyl, and low-pile carpet. A 280 mm floor clearance allows vacuuming beneath the seat without moving the complete chair. The recommended user weight capacity is 160 kg, and the net weight is 18 kg. This unbranded model, CVC-TAN-680-1020, is appropriate for executive meeting rooms, manager office visitor areas, conference and training rooms, hotel business lounges, reception consultation zones, and hard-floor corporate interiors. The tan upholstery and chrome finish provide a refined visual standard for guests staying through typical 30 to 90 minute meetings. For procurement planning, each set is supplied in two cartons with four-corner EPS protection, a 0.08 mm PE bag, and five-layer corrugated packaging. Reference packaged gross weight is 23 kg, carton volume is 0.26 cubic meter per set, and assembly time is 40 minutes per set.

Tan Upholstered Cantilever Conference Armchair Specifications

供应商与现货