纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	590 × 640 × 860 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	13 kg
Recommended user weight capacity	130 kg
Recommended user body width	500 mm
Seating capacity	1 person
Cantilever flex rating	120,000 seating cycles
Back static load target	91 kg
Floor sliding resistance	4 non-marking pads
Foam density	35 kg/m3
Foam indentation hardness	60 N
Foam rebound value	35%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Beige polyurethane leather, 1.2 mm thick, over shaped polyurethane foam
Back upholstery	Beige upholstered central insert with two vertical stitched face panels
Seat cushion foam	40 mm thick polyurethane foam at 35 kg/m3 density
Back padding	25 mm thick polyurethane foam at 30 kg/m3 density
Outer back shell	Molded bent plywood with exposed light edge banding
Arm side panels	12 mm dark walnut-toned veneered plywood panels integrated with the back shell
Cantilever frame	25 mm chrome-plated steel round tube in a twin U-shaped sled design
Seat mounting plate	2.5 mm powder-coated steel plate connecting shell to cantilever frame
Floor protection	Four black non-marking polymer pads bonded to frame contact ends
Seam construction	Bonded upholstery seams with 8 stitches per 50 mm face detail
Surface finish on metal	Polished chrome plating with a mirrored finish
Wood finish	Smooth dark veneer face with natural-toned exposed plywood edge

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Fixed sled base provides vertical flex of 8 mm under seating load and rebounds without moving parts
Swivel function	0-degree fixed orientation with no turntable or gas lift visible
Height adjustment	460 mm fixed seat height with no gas cylinder or adjustment lever
Recline function	Fixed back angle at 100 degrees from horizontal, with no tilt mechanism
Integrated arm support	Continuous wood and upholstered arm panels provide 210 mm support above the seat
Mobility design	Stationary chair with four floor pads and no casters
Stacking design	Non-stacking individual chair due to enclosed arm panels and tall bent wood shell
Floor protection	Four polymer glides reduce scratching and limit lateral sliding on hard floors
Seating access	Open-front sled base allows entry from the front with 420 mm knee clearance
Maintenance access	Upholstered shell attaches through an under-seat steel plate using removable fasteners
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packed gross weight	16 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive meeting room	Place around conference tables for visitors and managers, with fixed posture and low visual noise
Reception and waiting area	Use in rows or pairs for guest seating where stationary placement and floor protection are required
Private office guest position	Position one or two chairs in front of an executive desk for short-to-medium meetings
Hotel or club lounge	Specify for refined business lounges needing wood, chrome, and padded armchair styling
Home office consultation area	Use as a visitor chair opposite a workstation in a residential executive office
Conference training room	Deploy in fixed seating arrangements on hard floors or low-pile carpet with supplied glides
Flooring condition	Recommended for wood, tile, terrazzo, and low-pile carpet up to 6 mm pile height
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office seating safety recommendation	EN 16139 safety requirements for non-domestic visitor and meeting seating
Structural test recommendation	EN 16139 Level 2 durability and static-load test sequence
Upholstery fabric behaviour recommendation	EN 14465 upholstery fabric performance classification
Furniture emissions recommendation	EN 16516 chamber method for formaldehyde and VOC release verification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Visitor chair strength recommendation	ANSI/BIFMA X5.4 lounge and public seating static and dynamic load clauses
Base stability recommendation	ANSI/BIFMA X5.4 forward and rear stability acceptance tests

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Formaldehyde emission recommendation	GB/T 39600, E1 limit for wood-based panels used in the bent plywood shell
Upholstered furniture safety recommendation	GB 28241 clauses for cigarette ignition resistance of upholstered composites
Metal furniture coating recommendation	GB/T 3325 salt-spray and coating integrity checks for chrome-plated steel frames

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Formaldehyde emission recommendation：GB/T 39600, E1 limit for wood-based panels used in the bent plywood shell；
2. Upholstered furniture safety recommendation：GB 28241 clauses for cigarette ignition resistance of upholstered composites；
3. Metal furniture coating recommendation：GB/T 3325 salt-spray and coating integrity checks for chrome-plated steel frames；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CW-590-BEIGE-WOOD-CANTILEVER

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CW-590-BEIGE-WOOD-CANTILEVER

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CW-590-BEIGE-WOOD-CANTILEVER打开导出工具

页面快速操作

发布采购询价

产品描述

The Cantilever Guest Armchair with Upholstered Seat and Bent Wood Back, model CW-590-BEIGE-WOOD-CANTILEVER, presents a refined visitor seating solution with a quiet executive character. Its beige polyurethane-leather seating is paired with a molded bent plywood back shell, dark walnut-toned veneered side panels, and a polished chrome-plated steel cantilever frame. The upholstered back insert features two vertical stitched face panels, while the exposed light edge banding on the bent shell gives the chair a crafted, structured appearance. Integrated arm panels continue from the back and side structure, producing a streamlined armchair silhouette rather than a separate-mechanism office chair look. Overall dimensions are 590 x 640 x 860 mm, with a 540 mm clear width between armrests and a fixed 460 mm seat height. The twin U-shaped sled frame is made from 25 mm chrome-plated steel round tube and supports a 130 kg recommended user weight capacity. A 2.5 mm powder-coated steel plate connects the seat and shell assembly to the frame. Cushioning includes a 90 mm finished seat cushion with 40 mm, 35 kg/m3 polyurethane foam, plus a 70 mm padded back section using 25 mm, 30 kg/m3 foam. The back includes a 240 mm lumbar support zone and holds a fixed 100-degree angle from horizontal. The chair is built for a single occupant and fixed orientation: it does not swivel, tilt, recline, adjust in height, or include casters. Its cantilever action comes from the sled structure, which provides 8 mm of vertical flex under seating load and rebounds without moving parts. Four black non-marking polymer pads are bonded to the frame contact ends, making the chair suitable for stationary placement on hard floors or low-pile carpet. This model is appropriate for executive meeting rooms, reception and waiting areas, private office guest positions, hotel or club lounges, conference training rooms, and residential home-office consultation spaces. It works well around conference tables, in pairs or rows in reception settings, and opposite executive desks where low visual noise and a polished wood-and-chrome aesthetic are preferred. Because the chair is non-stacking, procurement planning should allow for individual seating footprints rather than compact storage. Delivery is organized as one set across two cartons, with reference assembly time of 40 minutes per set. Buyers should also note the fixed seat height, enclosed arm panels, stationary design, and recommended user body width of 500 mm when matching the chair to tables, room layouts, and intended guest use.

Cantilever Guest Armchair with Upholstered Seat and Bent Wood Back Specifications

供应商与现货