纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 720 × 1000 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	16 kg
Recommended user weight	140 kg
Static seat load target	200 kg
Backrest backward static load target	100 kg
Cantilever fatigue cycles	100,000 cycles
Upholstery abrasion target	50,000 Martindale cycles
Seating capacity	1 person
Wobble and floor-contact design	4 floor contact zones
Warranty target	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Tan leather-look upholstery with vertical pleated channel detail
Seat padding	Molded polyurethane foam cushion at 100 mm thickness and 45 kg/m3 target density
Back padding	Polyurethane foam back pad at 80 mm thickness and 40 kg/m3 target density
Armrest padding	Integrated foam-padded arm pads wrapped in the same tan upholstery
Inner load frame	Welded steel support frame with 2 mm nominal wall or sheet section
Cantilever base	Polished chrome-plated steel tube, 25 mm diameter and 1.5 mm wall target
Floor glides	Injection-molded polymer glides at four runner contact points
Seat-to-base connector	Steel mounting plate with 4 bolted connections to the cantilever crown
Back panel construction	Upholstered hard or semi-rigid shell over steel or plywood reinforcement
Stitching	Tone-on-tone stitched vertical channels with 80 mm seam pitch target
Surface finish	Bright polished chrome finish with reflective tubular frame
Color count	1 visible standard color, tan

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	Fixed non-swivel seat with no visible gas cylinder or turntable
Recline function	Fixed backrest with no visible tilt lever or multi-position locking mechanism
Height adjustment	Fixed 450 mm seat height with no height actuator or control paddle
Arm support	Continuous wraparound armrests provide forearm support at 670 mm total arm height
Flex movement	Cantilever base provides controlled vertical flex through the continuous steel tube
Floor protection	Replaceable polymer glides protect hard floors and reduce movement noise
Stacking capability	Non-stacking upholstered executive chair; no stacking alignment features visible
Cleaning and maintenance	Smooth upholstered surfaces and sealed chrome frame support wipe-down maintenance
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive meeting room	Use around conference tables where a fixed 450 mm seat height and formal appearance are required
Manager office visitor seating	Place one or two chairs in front of an executive desk for short-to-medium meetings
Reception lounge	Pair with side tables or low tables in upscale reception and waiting zones
Conference training rooms	Specify multiple identical chairs for uniform boardroom or training seating
Private consulting spaces	Use for legal, financial, or hospitality consultations requiring quiet, padded guest seating
Hard-floor office areas	Use glided chrome runners on tile, wood, or sealed concrete floors
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 non-domestic seating	Use for strength, durability, and safety requirements for non-domestic chairs
EN 1022 seating stability	Use for front, rear, and side overturning assessment of the cantilever chair

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4 lounge and public seating	Use as engineering reference for static, cyclic, and stability evaluation of visitor seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 furniture stability	Applicable standards and test results require confirmation
GB/T 10357.3 furniture strength and durability	Apply for seat, back, arm, and leg static and fatigue acceptance testing
GB 18584 interior decoration materials	Use for limited formaldehyde and harmful-substance release verification on wooden or composite components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 furniture stability：Applicable standards and test results require confirmation；
2. GB/T 10357.3 furniture strength and durability：Apply for seat, back, arm, and leg static and fatigue acceptance testing；
3. GB 18584 interior decoration materials：Use for limited formaldehyde and harmful-substance release verification on wooden or composite components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EC-CANT-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EC-CANT-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EC-CANT-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Upholstered Executive Visitor Chair presents a formal, tailored seating solution for meeting, reception, and private office settings. Its tan leather-look upholstery is detailed with vertical pleated channels, giving the padded back and seat a structured executive appearance. Continuous wraparound armrests extend from the seat surround and are upholstered in the same tan material, creating a cohesive profile while supporting the forearms. A polished chrome cantilever base adds a refined commercial contrast and a light visual presence beneath the upholstered body. With a fixed, non-swivel seat and fixed backrest, the chair has no visible gas cylinder, turntable, tilt lever, or height control, reinforcing its clean visitor-chair aesthetic. Construction combines comfort and support. The chair uses a welded steel inner support frame, an upholstered hard or semi-rigid back panel with steel or plywood reinforcement, and molded polyurethane foam in the seat with a polyurethane foam pad in the back. Integrated arm pads add cushioning at the armrests. The cantilever base is made from chrome-plated steel tube and connects to the seat through a steel mounting plate with four bolted connections. Injection-molded polymer glides are fitted at four runner contact points to protect hard floors and reduce noise during movement. The continuous steel base also provides controlled vertical flex. This model is designed for one occupant and is not intended for stacking. Its fixed seat height and formal character make it well suited to conference tables, boardroom and training rooms, executive meeting spaces, and manager offices where visitor seating is placed opposite a desk. It also works in upscale reception lounges or waiting areas paired with side or low tables, and in private legal, financial, or hospitality consulting rooms. The glided runners are particularly appropriate for tile, wood, sealed concrete, and other hard-floor office environments. Procurement teams should note that this is an unbranded model supplied as one set across two cartons, with assembly referenced at forty minutes per set. The chair should be selected where a consistent tan finish, integrated armrests, fixed posture, and chrome cantilever styling are desired rather than swivel, recline, or height-adjustment functions. For multi-room projects, ordering identical models supports a uniform boardroom or reception appearance, and replacement glides should be considered as part of ongoing maintenance for active commercial use.

Tan Upholstered Executive Visitor Chair with Chrome Cantilever Base Specifications

供应商与现货