纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 990 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	15 kg per chair
Recommended user weight	160 kg
Seat static-load verification	200 kg for 1 hour
Backrest backward-load verification	136 kg applied for 1 hour
Cantilever fatigue cycles	120,000 seating cycles at 102 kg
Upholstery abrasion resistance	50,000 Martindale cycles
Seat foam density	45 kg/m3 molded polyurethane
Back foam density	35 kg/m3 polyurethane
Foam resilience	40% ball rebound
Recommended occupancy	1 person

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer seating cover	Tan upholstery cover with smooth, fine-grain surface and stitched panel borders
Seat cushion	80 mm molded polyurethane foam over a rigid seat carrier
Back cushion	65 mm polyurethane padding attached to a shaped back board
Internal seat carrier	12 mm plywood or equivalent formed composite panel, 500 x 450 mm
Internal back carrier	10 mm molded plywood or reinforced polymer panel, 470 x 550 mm
Cantilever frame	25 x 2.0 mm bright chrome-plated welded steel tube
Arm support structure	Upholstered side shell over a steel or rigid polymer arm bracket connected to the seat frame
Arm pads	Padded polymer or foam top covered in the same tan upholstery, 25 mm thick
Underseat mounting plate	3 mm powder-coated steel plate with four bolt fixing points
Floor glides	Four black polymer or rubber pads bonded to chrome runner ends
Surface finish on metal	Polished chrome plating with a minimum 8 micron nickel and 0.25 micron chrome stack
Seam construction	Upholstered edge binding with 8 stitches per 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Fixed sled frame provides controlled vertical flex of 15 mm under normal seating load
Swivel function	360-degree rotation is not provided because the seat is fixed to a twin-runner cantilever frame
Height adjustment	Fixed 460 mm seat height with no gas lift, suited to 760 mm meeting tables
Back support	Tall 570 mm back provides continuous lumbar and lower-shoulder support at a fixed 10-degree recline
Arm support	Integrated 220 mm high armrests support forearms during discussion and laptop tasks
Floor protection	Four replaceable glides distribute the load and reduce noise on hard floors
Stacking capability	Non-stacking single chair; the high upholstered arms prevent vertical nesting
Side linking	Optional link connector can be fitted to the lower frame on 20 mm centers for row seating
Entry and exit	Open front sled base allows side and front access without a caster or pedestal obstruction
Cleaning access	Smooth upholstered panels and exposed polished metal frame permit wipe-down under the seat and around runners
Backrest recline angle	10 degrees from vertical
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Boardroom seating	Use around 760 mm conference tables for meetings lasting up to 3 hours
Executive visitor seating	Place in front of desks for guests and clients in private offices
Reception lounge	Use in pairs along low tables or consultation zones
Training room rows	Deploy in straight rows with optional linking clips to maintain aisle order
Hotel meeting suite	Specify for conference rooms and breakout areas requiring quiet, non-rolling visitor chairs
Government and finance meeting rooms	Suitable for conservative interiors needing durable fixed seating without recline controls
Floor compatibility	Recommended for tile, timber, vinyl, and low-pile carpet with supplied glides
Configuration note	Order in sets of 2 or more to pair with meeting tables ranging from 1,200 to 3,600 mm wide

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Use Level 2 contract-seating requirements for strength, durability, and safety in non-domestic meeting areas
EN 1022 applicability	Apply seating stability determination to front, rear, and side tipping on the finished chair

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Apply furniture mechanical test methods for chair stability on the finished cantilever chair
GB/T 10357.3 applicability	Apply strength and durability test methods for chair seat, back, arms, and frame joints
GB/T 27925 applicability	Use metal-furniture quality requirements for chrome-plated steel tube, welds, and corrosion performance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Apply furniture mechanical test methods for chair stability on the finished cantilever chair；
2. GB/T 10357.3 applicability：Apply strength and durability test methods for chair seat, back, arms, and frame joints；
3. GB/T 27925 applicability：Use metal-furniture quality requirements for chrome-plated steel tube, welds, and corrosion performance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CF-CNV-620-BRN

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CF-CNV-620-BRN

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CF-CNV-620-BRN打开导出工具

页面快速操作

发布采购询价

产品描述

The Brown Upholstered Cantilever Conference Armchair, model CF-CNV-620-BRN, presents a refined meeting-room silhouette with a medium-height upholstered back, wide tan seat, and integrated armrests. Its warm brown cover has a smooth, fine-grain surface with stitched panel borders, while the bright chrome cantilever frame gives the chair a light, open visual profile. The twin-runner sled base extends beneath the seat and rises into a coordinated arm structure, creating a consistent, orderly appearance suitable for formal interiors. Overall dimensions are 620 by 680 by 990 millimetres, with 540 millimetres of clear width between the arms. The chair is built around a welded steel cantilever frame using 25 by 2.0-millimetre chrome-plated tube. A 3-millimetre powder-coated steel mounting plate connects the seat assembly with four fixing points. The seat uses an 80-millimetre molded polyurethane cushion over a rigid plywood or equivalent formed composite carrier, while the back combines 65 millimetres of polyurethane padding with a molded plywood or reinforced polymer board. The finished seat cushion is 90 millimetres thick, backrest padding is 70 millimetres thick, and the molded seat foam density is 45 kilograms per cubic metre. Arm pads are 25 millimetres thick and covered in the same tan upholstery, with upholstered side shells over steel or rigid polymer brackets. This is a fixed, non-swivel chair with a 460-millimetre seat height and no gas lift. The 570-millimetre back is set at a fixed 10-degree recline and includes a 240-millimetre lumbar support zone for continuous lower-back and lower-shoulder support. Integrated 220-millimetre armrests support forearms during discussion or laptop work, and the sled frame provides controlled 15-millimetre vertical flex under normal seating load. Four replaceable glides help reduce noise and protect hard floors. The chair does not stack, as its high upholstered arms prevent vertical nesting. It is well suited to boardrooms and 760-millimetre conference tables for meetings up to three hours, as well as executive visitor seating, reception lounges, training rows, hotel meeting suites, breakout areas, and government or finance meeting rooms where quiet, non-rolling fixed seating is preferred. Training layouts can use optional linking clips to keep rows aligned. Procurement teams should note the unbranded supply, fixed seat height, non-stacking form, and need for assembly. Each chair weighs 15 kilograms, is supplied as one set in two cartons with a packaged gross weight of 23 kilograms, and has a stated assembly time of 40 minutes. The upholstery is rated for 50,000 Martindale abrasion cycles, and the chair carries documented load and fatigue verification, supporting specification for durable meeting and visitor environments.

Brown Upholstered Cantilever Conference Armchair Specifications

供应商与现货