纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 640 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	15 kg
Recommended user weight capacity	160 kg
Frame static load target	250 kg
Arm downward static load target	65 kg per arm
Seat impact durability	100,000 cycles
Backrest cyclic load durability	100,000 cycles
Upholstery abrasion resistance	50,000 Martindale cycles
Recommended users per unit	1 person
Foam density	45 kg/m3 seat, 35 kg/m3 back
Foam rebound	40%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Black leather or leather-look upholstery, visible smooth padded surface; exact hide or PU content requires supplier BOM.
Back upholstery	Black padded upholstery formed as separate upper and lower back panels with a horizontal seam.
Seat cushioning	High-resilience polyurethane foam, 80 mm thick, 45 kg/m3 target density for firm conference use.
Back cushioning	Molded polyurethane foam, 65 mm thick, 35 kg/m3 target density with segmented support.
Inner seat support	12 mm plywood or shaped composite seat board bolted to the steel support frame; structure hidden from view.
Back support board	8 mm molded plywood or composite back board behind the two visible cushion sections.
Cantilever frame	25 mm chrome-plated steel tube formed into twin curved sled legs with welded cross bracing.
Arm supports	Curved chrome-plated steel arms connected to seat frame and back support, with black padded contact surfaces.
Arm pads	Black upholstered pads matching seat and back material, fixed over steel or molded support plates.
Floor glides	30 mm non-marking polymer or rubber pads at four frame contact points to protect hard floors.
Frame finish	Polished chrome-plated metallic finish visible on exposed tubular arms and sled base.
Seam construction	Horizontal panel seam with 8 mm stitch pitch target; precise seam method requires fabric or hide sample.

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed seating motion	Cantilever flex under seated load without swivel, tilt lock, or height adjustment; suitable for formal meeting positions.
Back support	Two-section padded back provides separate upper-back and lumbar contact zones in one fixed 100-degree posture.
Arm support	Fixed upholstered armrests provide elbow support at 670 mm floor height and cannot be raised or removed by the user.
Floor protection	Four polymer or rubber glides cap the chrome sled feet and allow controlled repositioning on hard floors.
Entry and exit	Open cantilever front without casters provides leg clearance and stable side access around conference tables.
Frame flex	Twin chrome tubes and welded cross members create controlled spring-like flex while maintaining a fixed footprint.
Assembly requirement	Frame and upholstered body use bolted side connections; 8 bolts and an Allen key are the likely procurement configuration.
Security option	Frame crossbars can accept optional floor-fastening brackets for fixed meeting-room or high-use public seating.
Backrest recline angle	100 degrees from horizontal
Frame flex response	Twin 25 mm steel rails and welded cross bracing create controlled spring deflection while retaining one fixed footprint.
Floor fastening option	Cross rails accept optional bracket fixings at 2 points for permanent meeting-room or high-traffic seating rows.
Stacking capability	Non-stacking fixed design with a 640 mm footprint, intended for static conference layouts rather than nested storage.

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Boardroom conference seating	Use one chair per 600 mm table place for executives and visitors, matching its fixed 450 mm seat height and formal upright posture.
Manager meeting room	Place around rectangular or oval meeting tables for discussions lasting 4 hours, where padded seat and segmented back support are appropriate.
Executive reception area	Position in front of desks or low meeting tables for short visitor waiting and consultation use with non-marking glides.
Training and interview rooms	Arrange in stable rows or paired settings for candidates and staff; the fixed base reduces unintended movement during interviews.
Guest workstation seating	Use at fixed work surfaces or hot-desks where task swivel and casters are not required and a formal appearance is preferred.
Public corporate waiting zones	Specify in high-traffic reception clusters with 650 mm side spacing, supported by 100,000-cycle durability targets.
Fixed meeting-room installations	Add optional floor brackets where orderly rows must remain aligned in audit, government, or institutional meeting spaces.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139	2013+A1:2021 - recommended European strength, durability, and safety acceptance reference for non-domestic seating.
EN 1022	2018 - recommended stability test reference for upright fixed-base visitor and conference chairs.
EN 1728	2012 - recommended test-method reference for seating strength and durability acceptance procedures.

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OCC-CB-01-BLK

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OCC-CB-01-BLK

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OCC-CB-01-BLK打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Leather Conference Chair with Chrome Cantilever Frame presents a tailored, formal seating solution for professional meeting and visitor environments. Its black upholstery and polished chrome frame create a clean visual contrast, while the segmented backrest adds subtle structure through separate upper and lower panels joined by a horizontal seam. Fixed, gently curved armrests frame the seat, and the twin curved sled legs give the chair an open, streamlined profile suitable for boardrooms and reception settings alike. Overall dimensions are 600 by 640 by 900 millimetres, with a 540-millimetre clear width between the armrests. Designed as model OCC-CB-01-BLK and offered without a named brand, the chair uses black leather or leather-look upholstery over foam padding; the exact hide or polyurethane content should be confirmed through the supplier bill of materials. The seat features high-resilience polyurethane foam with a finished cushion thickness of 90 millimetres, while the back uses molded polyurethane foam with a 70-millimetre padded finish and segmented support. A plywood or shaped composite seat board and molded plywood or composite back board provide hidden support. The frame is built from 25-millimetre chrome-plated steel tube formed into twin cantilever sled legs with welded cross bracing. Black upholstered arm pads match the seat and back and are fixed over steel or molded support plates. Polymer or rubber glides cap the four frame feet for controlled repositioning on hard floors. Functionally, the chair is intentionally fixed rather than adjustable: it offers controlled cantilever flex under load, with no swivel, tilt lock, or height adjustment. The two-section back supports the upper back and lumbar area in a fixed 100-degree posture, while the armrests provide stationary elbow support at 670 millimetres from the floor. The open front allows clear leg room and side access around conference tables, and the absence of casters helps maintain a stable footprint. The chair is suited to executive boardrooms, manager meeting rooms, corporate reception and waiting areas, training and interview rooms, and fixed guest workstations where a formal appearance is preferred. Its padded construction is appropriate for meetings of extended duration, and the fixed base is useful in orderly rows, visitor clusters, or table-side consultation settings. Procurement planners should note the 15-kilogram net weight, 160-kilogram recommended user weight capacity, 50,000 Martindale abrasion result, and 100,000-cycle seat impact and backrest cyclic load targets. The frame and upholstered body use bolted side connections, with an expected configuration of eight bolts and an Allen key. Reference packaging is one set across two cartons, with a packaged gross weight of 23 kilograms, 0.26 cubic metres of carton volume, and 40 minutes assembly time per set. Buyers should confirm upholstery composition, glide type, finish consistency, replacement parts, assembly hardware, and delivery packaging before large-order placement. The indicative 20GP loading figure is 135 sets at 85 percent space utilization.

Black Leather Conference Chair with Chrome Cantilever Frame Specifications

供应商与现货