纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 620 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Net weight	12 kg
Seating capacity	1 person
Static seat proof load target	1,200 N
Backrest backward force target	700 N
Sled stability front-rear	10 degrees
Floor contact load per pad	40 kg
Recommended daily use duration	8 hours
Warranty target	5 years frame, 2 years upholstery
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Beige faux leather or leather-look upholstered surface over foam padding
Back upholstery	Beige upholstered contoured back panel with horizontal lumbar seam
Seat foam	80 mm molded polyurethane cushion pad with firm front edge
Back foam	60 mm contoured polyurethane padding over a rigid load-bearing back shell
Internal seat shell	12 mm molded plywood or equivalent composite load board
Internal back shell	8 mm molded composite board attached to the steel back brackets
Armrest pads	Beige upholstered padded pads with integrated curved support arms
Frame	25 mm chrome-plated bent steel tube forming a cantilever sled base
Under-seat support plate	2.5 mm powder-coated steel mounting plate connecting seat shell to frame
Back brackets	2 mm formed steel brackets linking backrest to the arm and base assembly
Floor glides	Four non-marking polymer pads bonded to the lower sled-frame ends
Surface finish	Polished chrome plating on welded and ground tubular steel joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Flex-back seating through controlled deflection of the steel sled frame, with no swivel function
Back support	Contoured medium-height back provides thoracic and lumbar support using one horizontal lumbar seam
Arm support	Integrated closed-loop armrests support forearms during meetings and desk-side conversations
Entry and exit	Open-front sled design allows side access and reduces tripping hazards compared with casters
Floor protection	Four polymer contact glides slide on hard floors while reducing chrome-to-floor abrasion
Stacking capability	Non-stacking chair with a wide rigid sled frame and fixed arm structure
Recline adjustment	0-degree fixed back angle with no visible tilt mechanism or lever
Height adjustment	450 mm fixed seat height with no gas cylinder or height actuator
Recommended table height	760 mm desks and conference tables pair with the fixed seat height
Upholstery maintenance	Wipe-clean padded surfaces with removable-compatible upholstery construction
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference rooms	Fixed cantilever chairs arranged around 760 mm meeting tables for formal discussion seating
Executive visitor seating	Beige padded chair placed in front of desks for clients or short-duration meetings
Training rooms	Non-swivel fixed seating supports orderly rows and reduces in-seat movement during presentations
Reception areas	Chrome frame and neutral beige upholstery fit executive lounges and corporate waiting zones
Open-office guest use	One chair placed beside workstations for brief collaboration or supervisor discussions
Hard-floor interiors	Glided sled base is appropriate for tile, vinyl, sealed concrete, and low-pile carpet
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 office seating	Use strength, durability, and stability requirements for non-domestic visitor and conference seating
EN 1022 seating stability	Specify stability test method for the four-contact cantilever chair on level floors
EN 14465 upholstery fabric abrasion	When textile upholstery is selected, require a Martindale abrasion result of at least 50,000 cycles

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs	Specify static load, back force, stability, and leg-strength tests for a general-purpose fixed office chair

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 furniture mechanical test	Applicable standards and test results require confirmation
GB/T 10357.3 furniture stability test	Use chair stability methods to verify front, rear, and side tipping resistance on the sled base
GB/T 3324 technical furniture requirement	Specify dimensional fit, appearance, material, and workmanship inspection for metal and upholstered office furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 furniture mechanical test：Applicable standards and test results require confirmation；
2. GB/T 10357.3 furniture stability test：Use chair stability methods to verify front, rear, and side tipping resistance on the sled base；
3. GB/T 3324 technical furniture requirement：Specify dimensional fit, appearance, material, and workmanship inspection for metal and upholstered office furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-SLED-BGE-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-SLED-BGE-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-SLED-BGE-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Sled-Base Upholstered Conference Chair is a tailored seating solution for professional meeting, visitor, and collaborative environments. Model OFC-SLED-BGE-01 features a clean, contemporary silhouette defined by neutral beige upholstery, a medium-height contoured back, integrated closed-loop armrests, and a polished chrome cantilever sled frame. Its fixed configuration presents a composed, orderly appearance suited to formal settings while retaining a light visual profile through the open-front base. A single horizontal lumbar seam accents the backrest and reinforces its structured support zoning. The chair accommodates one person, with an overall dimension of 620 by 620 by 1010 millimeters, a finished seat cushion thickness of 90 millimeters, backrest padding of 70 millimeters, a lumbar support zone height of 240 millimeters, and a clear width between armrests of 540 millimeters. Construction combines cushioned upholstery with a rigid steel support structure. The seat uses a beige faux leather or leather-look upholstered surface over molded polyurethane foam, including an 80 millimeter cushion pad with a firm front edge. Beneath the cushion is a 12 millimeter molded plywood or equivalent composite load board. The contoured back uses 60 millimeter polyurethane padding over an 8 millimeter molded composite board attached to steel back brackets. The armrest pads are upholstered in the same beige material and follow integrated curved support arms. The frame is formed from 25 millimeter chrome-plated bent steel tube in a cantilever sled shape, while a 2.5 millimeter powder-coated steel mounting plate connects the seat shell to the frame. Four polymer contact glides complete the base. Functionally, the chair provides controlled flex-back movement through deflection in the steel sled frame, without swivel, recline adjustment, or a visible tilt mechanism. The fixed back angle supports attentive meeting posture, and the medium-height back offers thoracic and lumbar support. Closed-loop armrests cradle the forearms during discussions, and the open-front sled design allows side access while avoiding the tripping considerations associated with casters. The glides enable movement on hard floors and help reduce abrasion between the chrome frame and floor surface. This is a non-stacking chair with a wide rigid frame and fixed arm structure. It is well suited to conference rooms arranged around 760 millimeter meeting tables, executive visitor positions facing desks, orderly training rooms, corporate reception lounges, waiting zones, and guest seating beside open-office workstations. The neutral beige and polished chrome finish integrates with executive interiors, and the glided base is appropriate for tile, vinyl, sealed concrete, and low-pile carpet. Procurement teams should note the recommended user weight capacity of 160 kilograms, net weight of 12 kilograms, static seat proof load target of 1,200 newtons, backrest backward force target of 700 newtons, front-rear sled stability target of 10 degrees, and floor contact load of 40 kilograms per pad. Each set ships in two cartons, with packaged gross weight of 23 kilograms, reference carton dimensions of 850 by 420 by 720 millimeters, and a reference assembly time of 40 minutes. The indicative loading figure is 135 sets in a 20GP container at 85 percent space utilization.

Sled-Base Upholstered Conference Chair Specifications

供应商与现货