纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 1050 mm
Frame tube diameter	25 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Chair net weight	16.5 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound value	40%
Recommended user height range	1880 mm
Seating capacity	1 person
Cantilever cyclic durability target	120,000 cycles
Static backrest load target	91 kg
Warranty target	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Brown smooth leather-look surface with stitched panel seams
Backrest upholstery	Brown continuous padded upholstery with one horizontal seam
Seat cushion foam	80 mm molded high-resilience polyurethane foam at 45 kg/m3
Back cushion foam	70 mm supportive polyurethane foam at 35 kg/m3
Internal seat support	12 mm plywood or steel seat deck with anti-squeak isolation
Back support board	8 mm molded plywood or steel back carrier secured to the frame
Cantilever frame	25 mm diameter bent tubular steel with polished chrome finish
Arm structure	Curved chrome steel support loop with brown padded arm cap
Frame protective feet	Black non-marking polymer glides on four runner contact points
Surface treatment	Polished chrome-plated metal frame with bright mirror finish
Seam construction	Color-matched stitched seams with 7 mm stitch pitch
Upholstery abrasion target	50,000 Martindale cycles

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed cantilever rocking response	Continuous steel sled base provides limited flex and returns upright without a tilt mechanism
Fixed arm support	Padded curved armrests support forearms at 230 mm above the seat and do not adjust
High-back torso support	620 mm backrest provides shoulder and upper-back support for meeting-room posture
Non-swivel design	Frame mounts directly to the seat without casters, gas lift, or turntable for stable visitor use
Floor protection	Four polymer runner glides reduce floor marking and permit controlled repositioning
Stacking capability	Non-stacking closed cantilever frame intended for permanent individual placement
Upholstered edge protection	Wrapped seat and back edges reduce contact impact around arms and conference tables
Maintenance access	Smooth upholstery and exposed chrome frame allow wiping and routine inspection of glides and fasteners
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive meeting room	High-back brown chair presents visitors and managers with formal support around conference tables
Boardroom visitor seating	Fixed sled base avoids rolling and provides a neat uniform arrangement for attendees
Reception or guest office	Padded arms and leather-look upholstery support short-to-medium waiting meetings
Manager desk guest position	450 mm seat height aligns with standard 760 mm office desks
Training or consultation room	Stable cantilever construction allows repeated use without adjustable mechanisms
Hotel business lounge	Polished chrome and smooth brown upholstery suit refined commercial lounge settings
Recommended layout grouping	Place in pairs or rows with 250 mm side clearance for entry and cleaning clearance
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 office seating	Applies to strength, durability, and safety requirements for non-domestic visitor seating
EN 1022 stability furniture	Applies to stability assessment of seated furniture
EN 12520 seating safety	Applies to safety requirements for household, contract, and non-domestic seating

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 General-Purpose Office Chairs	Back strength, seat static load, and durability clauses can guide commercial acceptance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 furniture mechanical test	Applicable standards and test results require confirmation
GB/T 10357.3 furniture mechanical test	Applies to backrest strength and rear-leg strength for fixed seating
GB/T 10357.6 furniture mechanical test	Applies to armrest downward and horizontal strength checks
GB/T 3324 technical furniture requirement	Applies to general dimensional stability, workmanship, and inspection requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 furniture mechanical test：Applicable standards and test results require confirmation；
2. GB/T 10357.3 furniture mechanical test：Applies to backrest strength and rear-leg strength for fixed seating；
3. GB/T 10357.6 furniture mechanical test：Applies to armrest downward and horizontal strength checks；
4. GB/T 3324 technical furniture requirement：Applies to general dimensional stability, workmanship, and inspection requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EC-CB-600-BRN

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EC-CB-600-BRN

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EC-CB-600-BRN打开导出工具

页面快速操作

发布采购询价

产品描述

The Brown Leather Executive Cantilever Visitor Chair, model EC-CB-600-BRN from Unbranded, is a formal single-person visitor seat with a high-back silhouette, polished chrome frame, and brown smooth leather-look upholstery. Its overall dimensions are 620 x 680 x 1050 mm, with a 620 mm backrest, 540 mm clear width between armrests, and fixed padded armrests set 230 mm above the seat. The chair presents a neat executive appearance: the seat uses stitched panel seams, while the continuous padded backrest has one horizontal seam. Curved chrome steel support loops form the arms and carry matching brown padded caps, giving the chair a coordinated look for ordered meeting and visitor settings. Construction combines comfort and structural support. The 25 mm diameter bent tubular steel cantilever frame has a polished chrome finish, and the inner support structure is steel. Seat cushioning uses 90 mm finished thickness built over 80 mm molded high-resilience polyurethane foam at 45 kg/m3, while the 70 mm back cushion uses supportive polyurethane foam at 35 kg/m3. Foam rebound is rated at 40 percent, and the 240 mm lumbar support zone contributes to upright meeting-room posture. Internally, the seat is supported by a 12 mm plywood or steel deck with anti-squeak isolation, and the back uses an 8 mm molded plywood or steel carrier secured to the frame. The closed sled base creates the chair's characteristic cantilever action: continuous steel allows limited flex and returns the chair upright without a tilt mechanism. There are no casters, gas lift, or turntable, so the chair is non-swivel and designed for stable guest use. Fixed curved armrests provide forearm support but do not adjust. Four black non-marking polymer glides protect flooring at the runner contact points and allow controlled repositioning. Wrapped seat and back edges also reduce impact when the chair is used close to arms or conference tables. The model is non-stacking and intended for permanent individual placement. This seating suits executive meeting rooms, boardroom visitor positions, reception areas, manager desk guest placements, training or consultation rooms, and refined hotel business lounges. The 450 mm seat height aligns with standard 760 mm office desks, and the recommended user capacity is 160 kg for users up to 1880 mm in height. For procurement, note that each set ships in two cartons with packaged gross weight of 23 kg, carton dimensions of 850 x 420 x 720 mm, and carton volume of 0.26 cubic meters per set. Indicative loading is 135 sets in a 20GP container at 85 percent space utilization. Assembly time is referenced at 40 minutes per set. The chair net weight is 16.5 kg.

Brown Leather Executive Cantilever Visitor Chair Specifications

供应商与现货