纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	160 kg
Net weight	14 kg
Seat foam density	35 kg/m3
Back foam density	30 kg/m3
Foam rebound rating	35%
Upholstery abrasion resistance	50,000 Martindale cycles
Colorfastness to rubbing	Grade 4
Cantilever static load verification	160 kg held for 1 hour
Seating capacity	1 person
Suggested warranty	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Grey smooth-faced upholstery with stitched paneling
Back upholstery	Grey padded upholstery divided by horizontal and vertical stitched seams
Seat cushion core	80 mm polyurethane foam pad on a rigid seat support
Back cushion core	60 mm padded polyurethane layer over a shaped back carrier
Internal back carrier	12 mm molded plywood or equivalent composite board
Internal seat carrier	12 mm plywood or steel seat pan with edge support
Arm pads	Grey upholstered pads with softly rounded ends
Arm support frame	25 mm chrome-plated round steel tube forming side loops
Cantilever base	Twin chrome-plated steel rod frames joined by front and rear floor runners
Surface finish	Polished chrome plating over welded steel tubing
Floor glides	4 polymer or nylon non-marking glides at runner contact points
Stitch construction	Matching grey thread with sewn panel seams and perimeter edge detail

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed-height seating	450 mm fixed seat height for conference and visitor use
Cantilever flex movement	Springy fore-and-aft deflection through continuous steel runners
Non-swivel design	Fixed seat orientation with no visible turntable or tilt mechanism
Back support	Tall segmented back with 600 mm backrest and defined lumbar panel
Arm support	Padded fixed armrests at 230 mm above the seat
Floor protection	4 non-marking glides distribute sled loads and reduce scratching
Stacking capability	Non-stacking single chair based on tall upholstered back and fixed arm loops
Nest or row placement	Armless lower profile absent; maintain 620 mm width per place setting
Cleaning access	280 mm under-seat clearance permits vacuuming under the fixed seat
Reclining function	No recline mechanism; back angle is fixed at an upright ergonomic rake
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Use around formal meeting tables where a 450 mm fixed seat height supports note-taking and discussion.
Executive visitor seating	Place in front of desks in management offices, matching the tailored grey back and chrome finish.
Reception area	Suitable for professional guest waiting zones with hard floors or low-pile carpet and non-marking glides.
Training room	Use for fixed-position sessions without task-chair controls, especially where a uniform executive look is required.
Hotel meeting suite	Appropriate for business lounges and function rooms needing padded arm support and easy floor cleaning.
Public institutional office	Suitable for consultation rooms and visitor stations under a 160 kg user-weight procurement target.
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013+A1:2016	Use for non-domestic seating strength, durability, and safety requirements for visitor chairs.
EN 1022:2018	Use for seating stability evaluation of the fixed cantilever chair on level floors.

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3	Use for chair and stool strength and durability test methods when verifying static and fatigue loads.
GB 18584	Use for indoor decorative-material limited harmful-substance release verification of furniture components.
GB/T 2960-2010	Use as furniture leather terminology and inspection reference only if leather upholstery is selected.

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3：Use for chair and stool strength and durability test methods when verifying static and fatigue loads.；
2. GB 18584：Use for indoor decorative-material limited harmful-substance release verification of furniture components.；
3. GB/T 2960-2010：Use as furniture leather terminology and inspection reference only if leather upholstery is selected.；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-CANT-GRY-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-CANT-GRY-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-CANT-GRY-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Grey Upholstered Cantilever Conference Chair with Chrome Sled Base is an unbranded office visitor chair, model OFC-CANT-GRY-01, designed for formal meeting and guest settings. Its tailored appearance combines grey smooth-faced upholstery, a tall segmented back, and a bright chrome cantilever frame, giving it a disciplined executive profile suited to coordinated interiors. Visually, the chair presents a padded seat and back with stitched paneling. The back is divided by horizontal and vertical seams, while the defined lumbar panel and softly rounded arm pads add structured detail. Twin chrome-plated steel rod frames form the cantilever base and connect through front and rear floor runners. The side loops of the arm support are made from 25 mm chrome-plated round steel tube, creating a continuous linear silhouette. Overall dimensions are 620 by 680 by 1010 mm, with 540 mm of clear width between the armrests. Construction balances cushioning with a supportive frame. The finished seat cushion is 90 mm thick and built on an 80 mm polyurethane foam pad over a rigid carrier; the seat support uses 12 mm plywood or a steel seat pan with edge support. The 70 mm padded back includes a 60 mm polyurethane layer over a shaped 12 mm molded plywood or equivalent composite carrier. Seat foam density is 35 kg/m3, back foam density is 30 kg/m3, and foam rebound is rated at 35 percent. The grey upholstery is specified for 50,000 Martindale abrasion cycles and Grade 4 colorfastness to rubbing. Four polymer, non-marking glides help distribute sled loads and reduce floor scratching. Functionally, the chair offers fixed-height, non-swivel seating at a 450 mm seat height, with no visible turntable or tilt mechanism. The continuous steel runners provide springy fore-and-aft deflection, while the 600 mm backrest includes a 240 mm high lumbar support zone. Fixed armrests are padded and positioned 230 mm above the seat. The chair is non-stacking due to its tall upholstered back and fixed arm loops. It is recommended for users weighing up to 160 kg and has a net weight of 14 kg. This model is appropriate for conference rooms, executive visitor positions, reception waiting areas, training rooms, hotel meeting suites, business lounges, and public institutional consultation spaces. It works on hard floors or low-pile carpet where easy cleaning and a uniform professional appearance are priorities. For procurement planning, each chair is supplied as one set in two cartons, with a packaged gross weight of 23 kg and carton volume of 0.26 cubic meters. Reference assembly time is 40 minutes per set, and indicative loading is 135 sets in a 20GP container at 85 percent space utilization.

Grey Upholstered Cantilever Conference Chair with Chrome Sled Base Specifications

供应商与现货