纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 650 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	11 kg
Recommended user weight capacity	160 kg
Seating capacity	1 person
Frame static-load verification target	113 kg
Cantilever cyclic flex test target	100,000 cycles
Backrest static force target	102 kgf
Upholstery abrasion acceptance level	50,000 Martindale cycles
Floor contact load points	4 points
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Green smooth-faced upholstery over foam, with tailored rounded front edge
Back upholstery	Green upholstered medium-back cushion with horizontal visual segmentation
Arm pads	Green upholstered pads following the curved arm line
Seat cushion foam	80 mm molded polyurethane foam, 45 kg/m3 procurement density
Back cushion foam	60 mm polyurethane foam, 35 kg/m3 procurement density
Cantilever frame	25 mm chrome-plated bent steel tube with continuous sled runners
Seat support plate	1.8 mm powder-coated steel seat carrier with frame weldments
Back support shell	8 mm molded plywood or engineered composite panel inside the upholstered back
Frame surface	Polished chrome plating with bright mirror finish
Floor protection	Snap-on polymer glides at four runner ends
Joining hardware	Steel bolts, washers, and welded tube joints with zinc or black oxide protection
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Movement type	Fixed non-swivel cantilever chair with controlled frame flex
Cantilever comfort action	Continuous steel runners flex by 8 mm under normal seating load
Arm support	Integrated curved arms provide forearm support at 680 mm floor height
Seat adjustment	No height, tilt, depth, or lumbar adjustment; fixed 460 mm seat height
Back posture	Medium-high back with lumbar break and slight upright recline
Floor mobility	Stationary chair with glide-friendly sled runners; no casters fitted
Stacking	Non-stacking individual guest chair
Cleaning access	Open sled frame permits floor cleaning beneath and around the seat
Nesting behavior	Non-nesting chair requiring 650 mm depth per place setting
Noise and floor protection	Polymer end glides isolate metal runners from hard floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Use around boardroom tables with 460 mm seat height and upright medium-back support
Reception area	Place opposite a desk or in visitor clusters with a polished green-and-chrome appearance
Manager office	Use as a fixed guest chair in front of an executive desk
Training room	Arrange in rows where durable 50,000-cycle upholstery and flexing frames are useful
Government or banking service room	Specify for high-traffic counter and meeting seating with replaceable glides
Hotel meeting suite	Pair with neutral conference tables in green-accent interiors
Hard-floor installation	Use polymer glides on tile, wood, vinyl, or sealed concrete floors
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139	Strength, durability, and safety reference for non-domestic seating
EN 1022	Stability test reference for upright domestic and non-domestic seating
EN 1728	Test methods for furniture seating strength and durability

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4	North American performance reference for lounge and public-office seating
BIFMA E3 level	Applicable standards and test results require confirmation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2	Applicable test standard for mechanical properties of furniture chairs and stools
GB/T 10357.3	Applicable chair and stool strength and durability test method
GB 18584	Applicable indoor furniture limit for formaldehyde emission from wood-based components
GB/T 3324	General technical specification for wooden furniture applicable to internal structural boards

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2：Applicable test standard for mechanical properties of furniture chairs and stools；
2. GB/T 10357.3：Applicable chair and stool strength and durability test method；
3. GB 18584：Applicable indoor furniture limit for formaldehyde emission from wood-based components；
4. GB/T 3324：General technical specification for wooden furniture applicable to internal structural boards；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CVC-GREEN-CANTILEVER-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CVC-GREEN-CANTILEVER-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CVC-GREEN-CANTILEVER-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Green Upholstered Cantilever Conference Chair with Chrome Sled Frame presents a clean, professional seating solution for meeting and visitor settings. Its green smooth-faced upholstery covers a molded foam seat and a medium-high back, with horizontal visual segmentation giving the backrest a structured appearance. The tailored rounded seat edge, curved padded arm pads, and bright polished chrome frame create a polished contrast suited to both traditional and contemporary interiors. The chair uses a continuous cantilever sled base rather than casters or a swivel mechanism, producing a streamlined silhouette with stable, open lines. Underneath, the seat rests on a 1.8 mm powder-coated steel carrier with frame weldments. The cantilever frame is made from 25 mm chrome-plated bent steel tube with continuous runners, while the upholstered back contains an 8 mm molded plywood or engineered composite support panel. Seat cushion foam is 80 mm molded polyurethane at a 45 kg/m3 procurement density, and the back cushion uses 60 mm polyurethane foam at a 35 kg/m3 procurement density. The finished cushion dimensions include a 90 mm seat, 70 mm back padding, 240 mm lumbar support zone, and 540 mm clear width between armrests. This is a fixed, non-swivel, single-person chair with a 460 mm seat height and no height, tilt, depth, or lumbar adjustment. The integrated curved arms provide forearm support at 680 mm from the floor, and the medium-high back includes a lumbar break with a slight upright recline. Under normal seating load, the steel runners flex by 8 mm, adding controlled comfort without casters or loose adjustment parts. The chair is non-stacking and fitted with glide-friendly runners; replaceable glides support maintenance in active settings. Its specified targets include a 160 kg recommended user weight capacity, 113 kg frame static-load verification, 102 kgf backrest static force, 100,000 cantilever flex cycles, and upholstery acceptance at 50,000 Martindale cycles. It is appropriate for boardrooms, reception visitor clusters, manager-office guest seating, training rooms arranged in rows, government or banking service areas, and hotel meeting suites, especially where a green accent is desired. Procurement planning should note the unbranded model CVC-GREEN-CANTILEVER-01 is supplied as one set in two cartons, with packaged gross weight of 23 kg, 0.26 m3 carton volume, and a reference assembly time of 40 minutes. The indicative loading figure is 135 sets in a 20GP container at 85 percent space utilization.

Green Upholstered Cantilever Conference Chair with Chrome Sled Frame Specifications

供应商与现货