商品供应商Tan Upholstered Executive Visitor Chair with Chrome Cantilever Base，Tan smooth-faced upholstery, likely leather-match, microfiber, or coated fabric; exact hide or textile grade needs BOM confirmation
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 620 × 680 × 1030 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Net weight | 15.5 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Recommended occupant size | 1 user, body height 1900 mm | |
| Cantilever static load verification target | 1000 N vertical load for 1 hour | |
| Backrest strength verification target | 670 N rearward pull for 1 hour | |
| Arm downward load verification target | 750 N per arm for 1 hour | |
| Leg floor-tipping stability target | Pass 6-degree lateral and forward stability test | |
| Frame cyclic deflection target | 100,000 cantilever flex cycles with no crack or permanent set | |
| Upholstery abrasion acceptance target | 50,000 Martindale cycles | |
| Recommended warranty period | 5 years for frame and 2 years for upholstery |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Outer seating upholstery | Tan smooth-faced upholstery, likely leather-match, microfiber, or coated fabric; exact hide or textile grade needs BOM confirmation | |
|---|---|---|
| Seat cushioning | 90 mm molded high-resilience polyurethane foam with 45 kg/m3 density target and 40% rebound target | |
| Back cushioning | 65 mm molded polyurethane foam with 35 kg/m3 density target and contoured lumbar support | |
| Internal seat shell | 9 mm molded plywood or 6 mm reinforced polypropylene composite load-bearing shell | |
| Back support shell | 8 mm molded plywood or equivalent curved composite panel bonded to foam | |
| Integrated arm construction | Upholstered curved arm pads connected to side wings, with internal steel or plywood reinforcement | |
| Cantilever frame | 25 mm diameter chrome-plated steel tube with 2.0 mm wall thickness target | |
| Surface finish | Bright polished chrome plating with 0.25 mm minimum coating build target | |
| Floor contact strips | Black polymer or felt anti-slip glides inserted along both sled runners | |
| Joint and mounting hardware | M8 steel mounting bolts and lock washers between seat shell and frame brackets | |
| Seam construction | Concealed edge binding with 7 stitches per 50 mm target seam pitch | |
| Arm padding | 30 mm resilient polyurethane pad under the tan upholstered arm surface |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Cantilever movement | Controlled vertical flex through the continuous steel sled frame, with no swivel, gas lift, or caster movement | |
|---|---|---|
| Seating function | Fixed 450 mm seat height for short and medium-duration meetings, interviews, and guest reception | |
| Back support | Tall fixed-angle back at 12 degrees provides upper-back and shoulder contact without recline adjustment | |
| Arm support | Integrated wraparound armrests provide forearm support and visually enclose the seat sides | |
| Floor protection | Continuous polymer glide strips on both runners distribute load and reduce scratching on hard floors | |
| Stacking capability | Non-stacking design with a single fixed cantilever frame | |
| Mobility | Stationary chair intended to be lifted or slid short distances, with no rolling components | |
| Cleaning access | Smooth continuous upholstery and open sled base permit wipe cleaning and floor cleaning beneath the seat | |
| Swivel and tilt lock | No swivel or tilt mechanism; back angle and seat position are fixed | |
| Positioning tolerance | Level floor use with a maximum recommended floor slope of 2 degrees | |
| Back recline angle | 12 degrees from vertical | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Export carton dimensions | 700 x 660 x 560 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Executive office guest seating | Suitable for placement in front of an executive desk where a fixed professional guest chair is required | |
|---|---|---|
| Conference and board rooms | Suitable around meeting tables at 750 mm height using the 450 mm fixed seat height | |
| Reception and interview areas | Provides padded upright seating for visitors waiting or participating in short-to-medium discussions | |
| Hotel meeting rooms | Fits formal business lounges and conference suites needing coordinated tan seating with chrome detailing | |
| Private consulting offices | Appropriate for financial, legal, and management consulting meetings requiring non-swiveling guest seating | |
| Hard-floor corporate interiors | Recommended for tile, timber, and concrete floors with continuous glides protecting the surface | |
| Furniture configuration | Use 2 chairs per executive desk or 12chairs around a medium boardroom table for a coordinated setup | |
| Not recommended for | 24-hour control-room or fully adjustable task seating, because it has no gas lift, tilt, swivel, or dynamic lumbar mechanism |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
该市场暂无标准数据。
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
该市场暂无标准数据。
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. 技术标准与检测报告由供应商在投标或采购确认阶段提供； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具