纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 700 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	14 kg
Recommended user weight capacity	160 kg
Recommended daily user duration	8 hours
Seating capacity	1 person
Frame static vertical load	320 kg
Upholstery abrasion acceptance target	50,000 double rubs
Foam density acceptance target	35 kg/m3 seat, 30 kg/m3 back
Foam rebound acceptance target	35%
Weld and frame cycle target	100,000 cantilever flex cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Taupe upholstered surface with a smooth leather-like grain, visible as a continuous padded seat cover
Back upholstery	Taupe upholstered back divided by V-shaped seam lines into upper and lower padded panels
Integrated arm/side panels	Upholstered wraparound side panels extend from the back to the seat and form soft armrests
Cushion foam	Molded polyurethane foam at 90 mm seat thickness and 60 mm back thickness
Internal support shell	Molded plywood or structural composite seat shell with 12 mm target thickness
Cantilever frame	Polished chrome-plated bent steel tube with continuous sled legs and rear return runners
Frame surface	Chrome plating over steel with a target 12 micron decorative plating thickness
Floor contact tips	Injected polymer glides at all four runner ends, 25 mm target mounting width
Stitching	Tone-on-tone polyester or bonded-thread seams with 8 stitches per 50 mm target
Seat underside	Concealed steel or plywood support plate connected to the upper cantilever crossbar
Edge trim	Slim dark perimeter piping or shadow line follows the outer shell edge
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Continuous steel sled frame provides controlled flexible give without tilt, swivel, or height adjustment
Integrated arm support	Upholstered side panels rise 220 mm above the seat to cradle forearms and reduce edge pressure
High-back support	570 mm back supports the thoracic and lower shoulder region during upright conversation seating
V-panel back contour	Central chevron seam shapes the lumbar zone and creates separate padded back sections
Floor protection	Four polymer end glides slide over hard floors while limiting direct metal-to-floor contact
Stacking capability	Non-stacking single chair based on the wide wraparound upholstered shell and fixed sled geometry
Reclining function	Fixed non-reclining back angle at 100 degrees from the seat plane
Swivel function	No swivel mechanism; the chair remains fixed on a stationary cantilever base
Height adjustment	No gas lift; fixed 450 mm seat height coordinates with standard conference tables
Cleaning access	Smooth upholstered surfaces and open sled base permit wiping under and around the chair without removable cushions
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Meeting room visitor side	Use on the visitor side of conference tables at a fixed 450 mm seat height for laptops, documents, and discussion
Executive office guest seating	Place one or two chairs opposite an executive desk; taupe upholstery and chrome frame suit formal offices
Reception lounge	Position in pairs around low tables for short waiting and consultation periods
Consultation room	Suitable for financial, legal, or advisory meetings where a fixed professional seat and integrated arm support are preferred
Hotel or club business center	Use in quiet work lounges and meeting suites with hard flooring or low-pile carpet
Open-plan touchdown area	Add along collaboration counters or small project tables for temporary seated work
Senior living reception	Suitable for staff-assisted visitor areas needing a supportive 450 mm seat and firm arm-side contact
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013+AC:2015 suitability	Strength, durability, and safety requirements for non-domestic non-swivel seating
EN 1022:2018 suitability	Determination of stability for seating, applicable to the cantilever sled base
EN 14465:2003 suitability	Upholstery fabric abrasion, assessment by Martindale method

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017 suitability	General-purpose office chair safety and durability reference for a fixed non-swivel guest chair

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 suitability	General technical requirements for wooden furniture, applicable if the internal shell uses wood-based panels
GB/T 3325-2017 suitability	Metal furniture technical requirements applicable to the steel cantilever frame and plated components
GB 18584-2024 suitability	Indoor decorative materials limited-release requirements applicable to wood-based furniture components
GB/T 10357.3-2013 suitability	Applicable standards and test results require confirmation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 suitability：General technical requirements for wooden furniture, applicable if the internal shell uses wood-based panels；
2. GB/T 3325-2017 suitability：Metal furniture technical requirements applicable to the steel cantilever frame and plated components；
3. GB 18584-2024 suitability：Indoor decorative materials limited-release requirements applicable to wood-based furniture components；
4. GB/T 10357.3-2013 suitability：Applicable standards and test results require confirmation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CGC-TAUPE-HB-SLED-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CGC-TAUPE-HB-SLED-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CGC-TAUPE-HB-SLED-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Taupe Upholstered Cantilever Guest Chair is a refined high-back office guest chair with a composed, contemporary silhouette. Its smooth taupe, leather-look upholstery covers a continuous padded seat and a tall back divided by a central V-shaped seam into upper and lower cushioned panels. Wraparound upholstered side panels extend from the back toward the seat, creating integrated soft armrests and giving the chair a unified, tailored appearance. Tone-on-tone stitching reinforces the clean visual character, while the polished chrome sled frame adds a bright linear contrast beneath the upholstered body. Overall dimensions are 680 by 700 by 1010 mm, with a 540 mm clear width between the armrests. Its fixed seat height supports a formal, upright posture for conversation and desk-side guest use. Construction pairs molded polyurethane cushioning with a molded plywood or structural composite internal seat shell. The seat cushion has a 90 mm finished thickness, while the backrest features padded support and a defined lumbar zone. The frame is made from bent steel tube with a polished chrome-plated finish, formed as a continuous cantilever sled with rear return runners. Injected polymer glides are fitted to all four runner ends to reduce direct metal-to-floor contact and allow easier movement across hard surfaces. The chair is designed for one occupant, with a recommended user weight capacity of 160 kg and an intended daily use duration of eight hours. Rather than tilting, swiveling, or adjusting in height, the continuous steel frame provides controlled flexible give. The back is fixed at a 100-degree angle from the seat plane, and the 570 mm high back supports the thoracic and lower shoulder area. Upholstered arm panels rise 220 mm above the seat, offering forearm support and a softer edge than exposed frame arms. The V-panel seam also shapes the lumbar region, while the fixed structure makes the chair predictable and orderly in professional settings. This model is well suited to visitor positions in meeting rooms, guest seating opposite executive desks, paired arrangements in reception lounges, and consultation rooms for financial, legal, or advisory meetings. It also fits hotel and club business centers, quiet work lounges, and open-plan touchdown areas beside collaboration counters or small project tables. It is compatible visually with hard flooring and low-pile carpet. Procurement teams should note that this is a non-stacking, single chair delivered as one set across two cartons, with a reference assembly time of 40 minutes. Packaged gross weight is 23 kg per set, and carton volume is 0.26 cubic meters. The unbranded model CGC-TAUPE-HB-SLED-01 should be specified where a polished executive look, integrated arm comfort, fixed seating geometry, and easy floor protection are more important than mobility adjustments or compact storage.

Taupe Upholstered Cantilever Guest Chair with Integrated Armrests Specifications

供应商与现货