纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	580 × 650 × 930 mm
Overall footprint	580 x 650 x 930 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	13 kg
Recommended user weight	160 kg
Seat static-load verification target	320 kg
Backrest backward static-force target	90 kg
Armrest downward static-load target	80 kg per armrest
Cantilever cyclic durability target	120,000 seating cycles
Seating capacity	1 person
Floor glide load distribution	4 contact points
Recommended warranty period	5 years
Color options in visible product	1 visible finish: black upholstery with polished chrome frame

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Black woven fabric or leather-look surface over padding, 1.2 mm visible facing thickness
Back upholstery	Black flexible upholstered panel attached to the continuous cantilever frame
Cushion foam	Molded polyurethane seat pad, 70 mm thick at 45 kg/m3 target density
Foam resilience	40% ball-rebound target
Internal seat support	12 mm plywood or steel-insert board inside the cushion assembly
Arm pads	Black padded pads mounted on the chrome tubular arm loops
Cantilever frame	Continuous 25 mm diameter steel tube with polished chrome plating, 2.0 mm target wall thickness
Frame finish	Polished chrome-plated exterior with bright mirror-like appearance
Back attachment hardware	Steel bolted brackets or riveted connectors at the upper and lower back bends
Seat retainer	Black steel mounting plate under the seat connecting cushion to twin cantilever rails
Floor glides	Four non-marking polymer glides fitted to runner ends
Seam construction	Visible edge binding with 8 stitches per 100 mm target seam pitch

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Suspension movement	Fixed cantilever flex through the continuous steel frame with 15 mm maximum controlled deflection
Back support	Fixed angled backrest providing continuous upper-body support at 100 degrees from horizontal
Arm support	Integrated closed-loop armrests at 220 mm above seat for elbow support during meetings
Swivel function	No swivel function; chair rests on a fixed sled base
Height adjustment	No height adjustment; seat is fixed at 450 mm
Recline adjustment	No user-adjustable recline lock or tension control; back angle is fixed
Mobility design	Four polymer glides allow repositioning on hard floors without casters
Stacking design	Non-stacking open-cantilever construction with fixed armrests
Occupant entry	Open front sled base permits front approach while arm loops provide side restraint
Floor protection	Replaceable end glides isolate chrome tubing from finished flooring
Backrest recline angle	100 degrees from horizontal
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Fixed-height 450 mm seat suits standard 760 mm meeting tables for multi-hour discussion seating
Visitor seating	Sled base and armrests provide formal seating for guests without casters or adjustable controls
Executive office	Black upholstery and polished chrome frame coordinate with wood, glass or dark executive desks
Training room	Non-swiveling cantilever design reduces distraction and provides compact row seating
Hard-floor installation	Four glides support use on tile, wood or vinyl floors when non-marking inserts are specified
Procurement configuration	Order in multiples of 4 for meeting tables and require identical black upholstery lot numbers
Not recommended setting	Not specified for 24-hour control-room use because lumbar, tilt and height adjustments are absent
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Safety performance applicability	EN 16139: seating for non-domestic use, strength, durability and safety
Structural test applicability	EN 1728: test methods for strength and durability of seating
Surface flammability applicability	EN 1021: ignition resistance to smouldering cigarette

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Commercial chair safety applicability	ANSI/BIFMA X5.1: general-purpose office chairs, static and cyclic load tests
Backrest test applicability	ANSI/BIFMA X5.1 back-rest strength and fatigue test clauses
Armrest test applicability	ANSI/BIFMA X5.1 arm static-load and fatigue test clauses

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 10357.2: vertical static load test for chairs and stools
Back and arm strength applicability	GB/T 10357.3: back and arm strength test for chair structures
Durability applicability	GB/T 10357.7: chair front and rear leg durability testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 10357.2: vertical static load test for chairs and stools；
2. Back and arm strength applicability：GB/T 10357.3: back and arm strength test for chair structures；
3. Durability applicability：GB/T 10357.7: chair front and rear leg durability testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CFC-BLK-CHROME-580

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CFC-BLK-CHROME-580

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CFC-BLK-CHROME-580打开导出工具

页面快速操作

发布采购询价

产品描述

The CFC-BLK-CHROME-580 is an unbranded black cantilever conference chair built for formal meeting, visitor, office, and training settings. Its visual character is defined by a continuous polished chrome tubular sled frame paired with black upholstery across the seat, back, and integrated arm pads. The closed-loop armrests flow into the frame structure, while the glide-mounted sled base gives the chair a clean, orderly profile suited to rowed layouts and conference table arrangements. The seat and back are upholstered in a black woven fabric or leather-look surface over padding. The seat uses a molded polyurethane cushion with an internal plywood or steel-insert support board, and the flexible upholstered back is fixed to the cantilever frame with steel bolted brackets or riveted connectors. Supporting the chair is a continuous chrome-plated steel tube frame with a bright mirror-like finish, terminated by four polymer glide feet for placement on hard floors. Functionally, this is a fixed-position seating solution rather than an adjustable task chair. It does not swivel, change height, or offer recline adjustment. The seat remains at a fixed height, and the angled backrest provides continuous upper-body support at 100 degrees from horizontal. The cantilever frame allows controlled flex during seating, with integrated armrests positioned to support elbows during meetings. The non-swiveling design helps maintain a focused seating arrangement in training rooms and around conference tables. The chair is well suited to standard conference rooms, executive offices, reception or visitor areas, and training spaces. Its black-and-chrome appearance coordinates with wood, glass, and dark desk finishes. For hard floors such as tile, wood, or vinyl, non-marking glide inserts should be specified where floor protection is required. The chair is intended for one occupant and includes padded armrests for a more structured guest or meeting seat. Procurement planning should account for fixed-height compatibility with standard meeting tables, formal side-by-side placement, and the need for consistent upholstery appearance across an installation. Buyers furnishing meeting rooms should order in multiples of four and request identical black upholstery lot numbers. Each set is supplied in two cartons, with assembly time referenced at 40 minutes per set. The packaged configuration and fixed sled construction make the model best suited to projects prioritizing uniform aesthetics, straightforward seating, and a non-caster footprint.

Black Cantilever Conference Chair with Chrome Sled Frame and Integrated Armrests Specifications

供应商与现货