纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 720 × 940 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Chair net weight	16 kg
Recommended seating duration	4 hours
Suggested users per unit	1 person
Cantilever flex test reference	100,000 cycles
Back static load acceptance reference	136 kg
Leg frame static load acceptance reference	227 kg
Stability tilt verification	10 degrees
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Smooth dark taupe upholstery, likely leather-look leather or polyurethane, fitted over padded foam
Back upholstery	Continuous taupe upholstered face with softly rounded top edge and tailored perimeter seam
Inner cushion foam	High-resilience polyurethane seat foam at 45 kg/m3 density and 40 percent rebound
Back padding foam	Molded polyurethane back pad at 35 kg/m3 density and 60 mm center thickness
Outer shell	Rigid dark molded back and seat shell forming the exposed perimeter rim
Arm pads	Integrated upholstered arm pads continuing the same taupe padded inner shell
Sled frame	Polished chrome-plated cantilever frame made from 25 mm diameter steel tube
Surface finish	Mirror-like chrome finish with welded side bends and lower tubular stretchers
Under-seat support plate	2.5 mm powder-coated steel mounting plate connecting shell to twin cantilever rails
Floor glides	Injection-molded polymer end glides at four runner contact points
Frame protective liner	Black non-marring spacer between chrome rails and dark shell underside
Upholstery seam treatment	Single perimeter piping-style seam following the shell edge

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed cantilever seating	The steel sled frame provides controlled rear flex without swivel, tilt lock, or height adjustment
Integrated arm support	Low wraparound arms provide elbow containment at 210 mm above the seat
Back posture support	The tall fixed back supports the lumbar and lower-thoracic region with a 100-degree relaxed back angle
No floor-rolling design	Four runner glides keep the chair stationary while allowing repositioning by lifting
Noise and floor protection	Replaceable polymer glides reduce metal contact and sliding noise on hard floors
Side-to-side frame bracing	Twin U-shaped side frames are joined by front and rear lower stretchers for torsional rigidity
Stacking capability	Non-stacking single chair with deep wraparound arms and fixed back shell
Quick maintenance access	Shell-to-frame bolts should permit upholstery shell replacement without cutting the frame
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Gross weight per carton	19 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training and boardroom rows	Arrange in straight rows with 900 mm pitch to preserve pull-up and egress space
Executive visitor seating	Place one or two chairs opposite a desk for short discussions and guest consultation
Hotel meeting lounge	Specify for reception lounges and quiet hotel meeting corners requiring upright padded seating
Open-plan collaboration zone	Use in touchdown or discussion areas where users sit for 4 hours or less
Healthcare or financial consultation room	Suitable for clean-profiled visitor seating where arms help users enter and leave the seat
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Specify strength, durability, and safety verification for non-domestic seating at usage level 2
EN 1022 applicability	Specify stability verification for the fixed cantilever chair on a level test surface
EN 12528 applicability	Use only if casters are later added; the visible product uses sled glides rather than casters

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.11 applicability	General-purpose office seating test reference for static, impact, and cyclic loading
ANSI/BIFMA X5.1 backrest test applicability	Back strength and cyclic force tests are relevant to the tall fixed upholstered back
ANSI/BIFMA e3 applicability	Use for multi-attribute sustainability, material, and social-responsibility scoring if requested

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Applicable standards and test results require confirmation
GB/T 10357.3 applicability	Use for chair strength and durability testing of the fixed sled frame and loaded back assembly
GB 28007 applicability	Applicable standards and test results require confirmation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Applicable standards and test results require confirmation；
2. GB/T 10357.3 applicability：Use for chair strength and durability testing of the fixed sled frame and loaded back assembly；
3. GB 28007 applicability：Applicable standards and test results require confirmation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UB-SLED-GUEST-CH-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UB-SLED-GUEST-CH-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UB-SLED-GUEST-CH-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary Padded Sled-Base Guest Chair presents a clean, upright profile suited to professional visitor and meeting settings. Its taupe upholstered seat and back are set within a rigid molded shell with dark exposed trim, while integrated low wraparound arms continue the padded inner form. The softly rounded backrest top, tailored perimeter seam, and polished chrome cantilever frame give the chair a refined contemporary appearance. Overall dimensions are 660 by 720 by 940 millimeters, with a 540-millimeter clear width between armrests. Construction combines padded comfort with a structured metal base. The seat uses high-resilience polyurethane foam at 45 kilograms per cubic meter density, with a finished cushion thickness of 90 millimeters. The molded back pad uses 35 kilogram per cubic meter polyurethane foam, with 70 millimeters of backrest padding and a 240-millimeter lumbar support zone. Upholstery is a smooth dark taupe leather-look material or polyurethane surface. Beneath the seating shell is a 2.5-millimeter powder-coated steel mounting plate, attached to a polished chrome-plated cantilever frame made from 25-millimeter steel tube. Welded side bends, twin U-shaped side frames, and front and rear lower stretchers contribute to the frame’s torsional rigidity. The fixed sled design provides controlled rear flex without swivel, tilt lock, or height adjustment. Its 100-degree fixed back angle supports the lumbar and lower-thoracic region, and the arm pads sit 210 millimeters above the seat for elbow containment. Four replaceable polymer runner glides prevent rolling, reduce metal contact and sliding noise, and help protect hard flooring; the chair is repositioned by lifting rather than rolling. It is a non-stacking, single-person guest chair with a recommended user weight capacity of 160 kilograms and recommended seating duration of four hours. This model fits boardroom and training rows, executive visitor positions opposite a desk, hotel reception or meeting lounges, open-plan touchdown areas, and healthcare or financial consultation rooms. For row planning, a 900-millimeter pitch supports pull-up and egress space. When specified with an executive desk, the recommended matching desk size is 2.4 meters. Procurement planning should account for the unbranded model number UB-SLED-GUEST-CH-001, a net chair weight of 16 kilograms, and delivery as one set across two cartons. Packaged gross weight is 23 kilograms per set, carton volume is 0.26 cubic meter per set, and reference assembly time is 40 minutes per set. The integrated arms and clean outer shell are beneficial in consultation settings, while the non-stacking form should be considered where storage rather than stationary seating is the priority.

Contemporary Padded Sled-Base Guest Chair Specifications

供应商与现货