纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 650 × 980 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	14 kg
Recommended user weight capacity	160 kg
Seating capacity	1 person
Backrest static load reference	120 kg
Frame stability reference	100,000 seating cycles
Arm downward load reference	60 kg per arm
Floor glide load distribution	40 kg per glide
Foam density	45 kg/m3
Foam rebound	40%
Warranty period	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Gray smooth-faced upholstery, likely leather-match or commercial polyurethane leather, with stitched horizontal back seam
Seat foam	Molded polyurethane cushion pad, 80 mm thick at 45 kg/m3 density target
Backrest padding	Polyurethane foam layer over a rigid back carrier, 70 mm total panel thickness
Back carrier	12 mm molded plywood or equivalent composite panel
Seat support board	12 mm bent plywood or engineered-wood support board beneath cushion
Armrest pads	Black molded polyurethane or hard polymer pads, 25 mm thick
Arm supports	Black powder-coated steel or die-cast support brackets linking pads to seat frame
Cantilever frame	Polished chrome-plated bent steel tube, 25 mm diameter and 1.5 mm wall thickness target
Floor glides	Four non-marking polymer glides pressed into the tube ends
Frame joining plate	2.5 mm steel under-seat mounting plate with welded or bolted cantilever connection
Surface finish	Polished chrome plating with bright reflective finish on exposed steel tubes
Stitching	Single horizontal seam with 6 stitches per 50 mm target on the backrest

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	No swivel function; chair is fixed to a cantilever sled base
Height adjustment	No gas lift or seat-height adjustment; fixed 450 mm seat height
Recline function	Fixed back angle at 100 degrees from seat plane, with no tilt mechanism visible
Rocking response	Cantilever tubes provide limited controlled flex of 8 degrees during seating movement
Arm support	Fixed T-shaped armrests provide forearm support at 230 mm above the seat
Mobility	Chair slides on four polymer glides rather than rolling casters
Floor protection	35 mm glide pads distribute load for hard floors and reduce scratching
Stacking	Non-stacking construction with a continuous cantilever frame
Nesting	No nesting mechanism or fold-up seat, intended for static meeting-room rows
Maintenance	Upholstered surfaces can be wiped clean; glides are replaceable without removing upholstery
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packed carton dimensions	700 x 660 x 260 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Meeting rooms	Fixed 450 mm seat height pairs with standard 760 mm conference tables for attendees and visitors
Executive offices	Gray upholstery and chrome frame provide formal visitor seating in front of executive desks
Interview rooms	Fixed armrests and non-swivel base create stable seating for structured conversations and candidate meetings
Training spaces	Cantilever design allows quick repositioning on hard floors while avoiding casters in controlled rooms
Reception zones	Compact 620 mm width supports visitor seating where a tailored business appearance is required
Workstation pull-up use	Chair can serve as temporary task seating beside desks for short collaboration sessions
Commercial projects	160 kg user-load target and replaceable glides suit multi-chair procurement and facility maintenance
Hard-floor environments	Polymer glides are intended for tile, wood, laminate, and low-pile floor surfaces

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OCC-CB-GRY-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OCC-CB-GRY-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OCC-CB-GRY-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Gray Upholstered Cantilever Conference Chair with Fixed Armrests, model OCC-CB-GRY-01, offers a structured seating solution for professional meeting and visitor settings. It is supplied unbranded, presenting a clean and neutral specification suited to coordinated commercial interiors. The chair has a medium-height upholstered back, padded seat, fixed T-shaped armrests, and a polished chrome-plated cantilever sled frame. Its gray smooth-faced upholstery is complemented by a stitched horizontal seam across the back, while black armrest pads and supports create a defined contrast with the bright tubular frame. The fixed armrests provide a clear seating boundary and forearm support, and the open sled base gives the chair a streamlined conference-room profile. The clear width between the armrests is 540 mm, and the overall dimensions are 620 mm wide, 650 mm deep, and 980 mm high. Construction combines cushioned surfaces with a supportive internal structure. The seat uses a molded polyurethane cushion pad over a bent plywood or engineered-wood support board, with a finished cushion thickness of 90 mm. The backrest features polyurethane foam over a rigid molded plywood or equivalent composite carrier, with 70 mm of total panel thickness and a defined lumbar support zone. The armrest pads are black molded polyurethane or hard polymer, mounted on black powder-coated steel or die-cast brackets. The cantilever frame is made from polished chrome-plated bent steel tube and terminates in four non-marking polymer glides. As a fixed-position conference chair, it does not swivel, tilt, or include height adjustment. The seat height is fixed at 450 mm, and the back angle is set at 100 degrees from the seat plane. The cantilever tubes allow limited controlled flex during seating movement, balancing a formal posture with a degree of comfort. The glides enable the chair to slide on hard floors while reducing scratching, making it quieter and more controlled than caster-based seating in managed rooms. This model is appropriate for meeting rooms, executive offices, interview rooms, training spaces, reception zones, and short-stay workstation collaboration. Its fixed height aligns with standard conference tables, and its compact width supports orderly visitor and attendee layouts. Procurement teams should note the recommended user weight capacity of 160 kg, net weight of 14 kg, single-person seating capacity, and reference figures for frame stability, static back load, arm load, and glide load distribution. The product is packed as one set across two cartons, with a packaged gross weight of 23 kg and a reference assembly time of 40 minutes per set. Buyers should confirm floor compatibility, delivery packaging, assembly allocation, and upholstery composition against project requirements before placing an order.

Gray Upholstered Cantilever Conference Chair with Fixed Armrests Specifications

供应商与现货