| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 600 x 550 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Leg cross-section at floor | 45 mm square | |
| Leg splay offset from center | 120 mm | |
| Under-table clearance height | 520 mm | |
| Edge radius | 15 mm | |
| Foot pad diameter | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 30 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Vertical stability tilt threshold | 15 degrees | |
| Surface scratch resistance (lacquer finish) | Class 2 | |
| Recommended warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid natural hardwood with visible oak grain, matte clear lacquer finish | |
|---|---|---|
| Support legs | Solid tapered hardwood, splayed outward, matched wood finish to tabletop | |
| Tabletop edge | Continuous rounded solid wood edge, no veneer edge banding | |
| Leg attachment hardware | Zinc-plated steel screw fasteners with pre-drilled mounting points | |
| Floor contact pads | Black non-slip rubber pads fitted to each leg base | |
| Surface coating | Low-VOC matte clear lacquer, water-resistant for damp cloth cleaning | |
| Leg-to-table joint | Reinforced mortise and screw hybrid connection | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Assembly method | Knockdown screw-fit leg attachment with included hex key, pre-drilled holes | |
|---|---|---|
| Floor protection | Rubber foot pads prevent hard floor scratching and reduce sliding | |
| Surface use | Smooth single-tier round top supports lamps, books, drinks or small decor | |
| Level adjustment | Fixed-height non-adjustable feet for even hard floor surfaces | |
| Edge safety | Rounded smooth edges eliminate sharp impact points for household use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Sofa side placement | Position next to living room sofas for holding drinks, remote controls and table lamps | |
|---|---|---|
| Bedside nightstand use | Place next to beds for holding phones, books and small bedtime items | |
| Lounge accent furniture | Use in reading nooks or lounge areas as a decorative functional surface | |
| Small balcony placement | Suitable for compact balcony spaces for holding plants and beverages | |
| Waiting area furnishing | Deploy in office reception or lounge waiting areas for guest convenience |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable for performance testing | |
|---|---|---|
| EN 71-3:2019 | Safety of furniture surface coating migration for household use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances in wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
