| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 48 mm | |
| Pedestal base bottom diameter | 450 mm | |
| Pedestal base top connection diameter | 250 mm | |
| Pedestal inset from table end | 300 mm | |
| Under-table knee clearance height | 702 mm | |
| Clear span between pedestals | 1300 mm | |
| Tabletop corner radius | 50 mm | |
| Table edge profile thickness | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Seating capacity | 8 people | |
|---|---|---|
| Distributed static tabletop load | 150 kg | |
| Single pedestal vertical static load | 100 kg | |
| Finish scratch resistance | 3000 cycles | |
| Wood moisture content | 10% | |
| Structural warranty | 5 years | |
| Net product weight | 110 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Solid kiln-dried hardwood core | |
|---|---|---|
| Tabletop surface | Walnut wood veneer with matte NC lacquer finish | |
| Pedestal bases | Solid wood construction with matching walnut veneer wrap | |
| Tabletop to pedestal connectors | 8mm steel threaded inserts with hex bolts | |
| Base bottom glides | Non-marking felt floor protection pads | |
| Finish coat thickness | 0.15mm | |
| Veneer layer thickness | 0.6mm | |
| Wood joint adhesive | PVA wood glue for structural connections | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Accommodates 2 seats at each end, 4 seats along sides | |
|---|---|---|
| Assembly requirement | Knock-down assembly requiring 2 people, hardware included | |
| Floor compatibility | Works on hard wood, tile, and low-pile carpeted surfaces | |
| Surface maintenance | Wipe clean with damp cloth, avoid prolonged liquid exposure | |
| Stability design | Wide flared pedestal bases prevent tipping under normal use | |
| Edge safety | Rounded tabletop corners eliminate sharp impact points | |
| Leveling adjustment | Fixed glides with optional minor shimming for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Serves 8 people for family meals and formal dinner gatherings | |
|---|---|---|
| Open-plan kitchen dining area | Minimalist design complements modern open-concept living spaces | |
| Small commercial cafe seating | Durable solid wood construction suits light commercial dining use | |
| Conference breakout space | Provides spacious surface for informal team meetings in offices | |
| Show home staging | Contemporary walnut finish fits modern interior design staging schemes |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, strength/durability requirements for dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture test methods for table stability and load performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for domestic use | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for domestic use; 2. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
