| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1220 x 610 x 460 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg height | 410 mm | |
| Leg cross-section at top | 45 x 45 mm | |
| Lower shelf clearance above floor | 230 mm | |
| Clearance between tabletop and lower shelf | 205 mm | |
| Slatted shelf slat width | 30 mm | |
| Gap between slats on lower shelf | 15 mm | |
| Corner radius of tabletop | 20 mm | |
| Leg splay outward angle | 5 degrees | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load capacity | 50 kg | |
|---|---|---|
| Net product weight | 20 kg | |
| Finish scratch resistance rating | 2H pencil hardness | |
| Recommended maximum place setting/object count | 8 items | |
| Structural connector static shear strength | 120 kg per joint | |
| Wobble tolerance on level floor | 2 mm | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid bamboo/light oak veneer over engineered wood core | |
|---|---|---|
| Support legs | Solid natural wood, tapered profile | |
| Lower shelf slats | Solid natural wood slats, parallel alignment | |
| Frame apron and stretchers | Solid wood framing, secured with exposed metal screws | |
| Surface finish | Clear matte UV lacquer, 0.1 mm dry film thickness | |
| Joinery hardware | Zinc-plated steel confirmat screws, 5 mm diameter | |
| Foot pads | Non-marking PE plastic floor protection pads, 3 mm thickness | |
| Edge treatment | Sanded and rounded eased edges, no sharp corners | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Lower open slatted shelf | Provides full-width open storage for magazines, remotes and decor, with air circulation gaps | |
|---|---|---|
| Knock-down assembly | Requires leg and shelf attachment to tabletop frame with included hardware, no special tools needed | |
| Level floor stability | Four independently placed tapered legs with anti-slip pads prevent sliding on hard flooring | |
| Surface use suitability | Smooth sealed tabletop supports drink service, display items and casual living room use | |
| No moving parts | Fixed rigid structure with no adjustable height, folding or extendable components | |
| Weight distribution | Outward-splayed leg geometry distributes top loads evenly across four floor contact points | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 1270 x 660 x 110 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room seating area | Placed in front of sofas or sectionals for drink service, remote storage and decor display | |
|---|---|---|
| Small apartment lounges | Compact open-shelf design provides storage without visual bulk in compact spaces | |
| Scandinavian or mid-century modern interiors | Light natural wood finish and tapered leg design matches minimalist natural wood decor schemes | |
| Office break rooms | Used as a low side table for lounge seating areas in casual office spaces | |
| Vacation rental living spaces | Easy to assemble, scratch-resistant finish withstands frequent guest use |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
