| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1600 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Leg frame cross-section width | 50 mm | |
| Horizontal stretcher dimensions | 1200 x 80 x 25 mm | |
| Under-table knee clearance height | 670 mm | |
| Under-table leg clearance width between frames | 1100 mm | |
| Edge bevel width | 20 mm | |
| Leg frame floor contact length | 480 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 50 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Seating capacity | 6 persons | |
| Finish abrasion resistance | Class 2 for domestic use | |
| Joint static load rating | 100 kg per connection | |
| Wood moisture content | 10% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Solid natural ash wood with beveled edge, matte clear lacquer finish | |
|---|---|---|
| U-shaped end leg frames | Bent solid ash wood, matched natural finish | |
| Horizontal cross stretcher | Solid ash wood, fastened with exposed metal bolts | |
| Joint hardware | Zinc-plated steel bolt connectors, 6mm diameter | |
| Tabletop underside support rail | Solid wood perimeter apron, 80mm height | |
| Floor contact pads | Felt anti-scratch pads fitted to base of leg frames | |
| Finish coat | Water-based matte UV lacquer, 0.15mm thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Structural support | Two U-shaped bentwood end frames connected by horizontal stretcher to eliminate wobble | |
|---|---|---|
| Assembly method | Knock-down bolted assembly between leg frames, stretcher and tabletop | |
| Seating access | Open full-width under-table clearance allows seating on all four sides | |
| Leveling adjustment | Fixed leg height without integrated levelers, suitable for even hard floors | |
| Surface performance | Matte finish resists minor water rings and daily wear for domestic dining use | |
| Floor protection | Felt base pads prevent scuffing on wood, tile or laminate flooring | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Domestic dining room | Seats 6 people for daily family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen dining area | Light natural wood finish complements Nordic, Scandinavian and Japandi interior styles | |
| Small office break room | Provides durable seating for staff meals and informal team meetings | |
| Studio apartment multi-use space | Functions as both dining surface and large work desk for home office tasks | |
| Café casual dining area | Minimalist design suits independent cafe interiors with light wood decor |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance validation | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids, applicable for finish performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance; 2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
