| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | Dia800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Leg diameter at top joint | 30 mm | |
| Under-table knee clearance height | 650 mm | |
| Cross-brace mounting height from floor | 360 mm | |
| Leg splay base footprint diameter | 700 mm | |
| Table edge radius | 3 mm | |
| Minimum clear knee space perimeter | 360 degrees unobstructed | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight per unit | 15 kg | |
|---|---|---|
| Static distributed tabletop load | 50 kg | |
| Seating capacity | 4 people | |
| Surface scratch resistance rating | 2000 cycles | |
| Vertical leg compression strength | 200 kg per leg | |
| Wobble deflection under 50kg load | 2 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm E1 grade MDF panel | |
|---|---|---|
| Tabletop surface | Matte white melamine laminate | |
| Table legs | Solid natural beech wood, tapered cylindrical dowel | |
| Underframe bracing | 6mm diameter black powder-coated steel wire | |
| Fasteners | Zinc-plated steel hex bolts with cross dowels | |
| Foot pads | 20mm diameter non-slip polyethylene glides | |
| Surface finish on wood legs | Clear matte nitrocellulose lacquer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly with included hex key, 50 minutes time | |
|---|---|---|
| Level adjustment | 10mm height adjustment via rotating foot pads for uneven floors | |
| Cleaning method | Wipe-clean with damp cloth, no abrasive cleaners required | |
| Structural rigidity | Wire cross-brace prevents leg splay and wobble under normal dining loads | |
| Floor protection | Soft polymer glides prevent hardwood and tile floor scratching | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining nook | Fits small apartments and kitchen dining areas seating up to 4 diners | |
|---|---|---|
| Cafe and bistro seating | Suitable for casual commercial food service environments | |
| Office break room | Provides compact dining surface for staff meal and casual meeting use | |
| Small apartment studio | Space-saving round shape eliminates sharp corners for tight living spaces | |
| Reception waiting area | Works as side table for guest refreshments in reception zones |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture surface test methods for resistance to cold liquids and abrasion |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop and wood leg structural safety | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, require E1 grade for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop and wood leg structural safety; 2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, require E1 grade for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
