| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 450 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Under-table clearance height | 390 mm | |
| Leg assembly width (each end) | 380 mm | |
| Leg vertical member cross-section | 40 x 40 mm | |
| Leg horizontal stretcher cross-section | 30 x 40 mm | |
| Tabletop edge radius | 15 mm | |
| Leg setback from table end | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 22 kg | |
|---|---|---|
| Distributed static top load capacity | 136 kg | |
| Leg assembly static load per end | 68 kg | |
| Surface finish abrasion resistance | 400 cycles | |
| Wood moisture content | 10% | |
| Anti-slip foot pad diameter | 20 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Solid kiln-dried oak wood with visible grain, matte natural oil finish | |
|---|---|---|
| Leg vertical members | Solid oak wood, squared cross-section, matched finish to tabletop | |
| Leg stretchers | Solid oak wood, fixed joinery to vertical legs for structural rigidity | |
| Surface finish | Matte natural wood oil, 0.1mm dry film thickness, low VOC formulation | |
| Joinery hardware | Zinc-plated steel connector bolts, 8mm diameter, with pre-installed threaded inserts | |
| Floor protection pads | Felt anti-abrasion pads fitted to bottom of each leg foot | |
| Edge treatment | Hand-sanded rounded edges, no sharp corners along oval table perimeter | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed 450 mm top height, no lift or tilt mechanism incorporated | |
|---|---|---|
| Storage configuration | Open under-table space with no drawers, shelves, or enclosed storage compartments | |
| Assembly requirement | Knock-down assembly requiring attachment of two leg assemblies to tabletop with included hardware | |
| Floor protection | Felt pads on all leg feet prevent scratching of hard flooring surfaces during placement | |
| Structural bracing | Integrated trapezoidal leg frames eliminate need for central cross supports, preserving open leg space | |
| Surface use suitability | Flat oval top supports placement of beverages, books, decor, and serving trays for living room use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of sofas for holding beverages, reading materials, and decorative objects | |
|---|---|---|
| Lounge and reception waiting areas | Used in casual seating zones for light refreshment placement and guest use | |
| Scandinavian or Japanese minimalist interiors | Coordinates with light wood, neutral-toned, uncluttered interior design schemes | |
| Small apartment living spaces | Compact oval footprint fits limited floor space without sharp corner hazards |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - strength, durability and safety requirements for domestic tables, applicable for structural performance verification | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Safety of toys - migration of certain elements, applicable if used in households with young children |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, applicable for formaldehyde/VOC verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality checks; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, applicable for formaldehyde/VOC verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
