| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 800 x 800 x 480 mm | |
|---|---|---|
| Larger table diameter | 800 mm | |
| Smaller table diameter | 700 mm | |
| Table height (both units) | 480 mm | |
| Tray lip height | 20 mm | |
| Tabletop thickness | 18 mm | |
| Leg length | 462 mm | |
| Leg diameter (top attachment point) | 35 mm | |
| Leg splay angle from vertical | 15 degrees | |
| Floor clearance under tabletop | 440 mm | |
| Nesting insertion depth | 620 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static load per tabletop | 25 kg | |
|---|---|---|
| Set total net weight | 16 kg | |
| Static stability load per leg | 20 kg | |
| Tray lip containment height | 20 mm | |
| Surface abrasion resistance | Class 2 | |
| Recommended weight capacity for placed items | 20 kg per table | |
| Floor protection rating | Non-marking | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 18mm MDF substrate with white matte paint finish | |
|---|---|---|
| Small tabletop | 18mm MDF substrate with white matte paint finish | |
| Tray perimeter lip | Integral MDF with matching white painted finish | |
| Table legs | Solid natural oak, tapered cylindrical profile, clear matte lacquer | |
| Leg attachment hardware | Zinc-plated steel screw-in inserts, pre-installed in tabletop base | |
| Foot pads | Non-slip non-marking injection-molded plastic, fitted to leg bottoms | |
| Surface coating thickness | 0.15 mm | |
| Leg finish | Water-based clear lacquer, 2 coats | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides 620mm under larger table to reduce footprint | |
|---|---|---|
| Tray edge containment | 20mm raised lip secures remotes, mugs and decor from sliding off | |
| Quick knock-down assembly | Legs screw into pre-installed inserts without additional tools | |
| Floor protection | Plastic foot pads eliminate hard wood contact with flooring | |
| Flexible use configuration | Tables can be separated for use as side surfaces or nested for compact use | |
| Stable three-leg design | Splayed legs create triangular support to eliminate wobble on uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room front-of-sofa placement | For holding drinks, decor and remote controls in residential seating areas | |
|---|---|---|
| Small apartment space-saving use | Nesting design reduces footprint when full surface area is not needed | |
| Flexible extra surface use | Separated small table functions as side table for seating or accent surface | |
| Mid-century modern / Scandinavian interiors | Natural oak legs and white tray top match Nordic and retro design schemes | |
| Light commercial lounge use | Suitable for boutique waiting areas or co-working lounge seating zones |
EU Market Access Requirements* EN Standards
| Residential furniture safety for tables | EN 12521:2015 | |
|---|---|---|
| Surface scratch resistance | EN 15186:2012 | |
| Formaldehyde emission from wood panels | EN 312:2010 P2 grade |
Standards applicable to China-market projects
| Tabletop formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| Furniture structural strength | GB/T 10357.1 | |
| Surface coating heavy metal content | GB 18584 |
This product must meet the following technical requirements: 1. Tabletop formaldehyde emission: GB/T 18580E1 grade; 2. Furniture structural strength: GB/T 10357.1; 3. Surface coating heavy metal content: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
