| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1000 x 1000 x 760 mm | |
|---|---|---|
| Tabletop thickness | 28 mm | |
| Leg clearance height (under cross brace) | 630 mm | |
| Tapered leg top section | 60 x 60 mm | |
| Tapered leg bottom section | 30 x 30 mm | |
| Cross stretcher width | 50 mm | |
| Leg splay angle from vertical | 12 degrees | |
| Edge profile radius | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load capacity | 250 kg | |
|---|---|---|
| Net weight of assembled table | 32 kg | |
| Seating capacity | 4 people | |
| Lateral stability wobble limit | 1 mm | |
| Finish abrasion resistance | 1000 cycles | |
| Recommended minimum room area for use | 6 sqm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Solid natural oak with open matte lacquer finish | |
|---|---|---|
| Table legs | Solid natural oak tapered sections with matching finish | |
| Cross stretcher bracing | Solid natural oak horizontal rails | |
| Foot glides | Black polymer non-slip floor protection pads | |
| Joinery hardware | Zinc-plated steel bolt connectors with dowel joints | |
| Wood moisture content | 12% | |
| Lacquer coat layers | 3 coats of low-VOC matte lacquer | |
| Underside structural block | Solid wood reinforcement at leg-to-top joints | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Floor protection | Fixed polymer glides prevent floor scratching during movement | |
|---|---|---|
| Knockdown assembly | Legs and stretchers bolt to tabletop for flat-pack transport | |
| Leveling compatibility | Fixed glides accommodate 2mm thick adhesive felt pads for uneven floors | |
| Perimeter seating access | Splayed legs create unobstructed knee space for 4 diners | |
| Surface maintenance | Matte finish allows damp cloth cleaning without water damage | |
| Under-table clearance | 630mm knee clearance fits standard dining chairs with armrests | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Main carton (tabletop) dimensions | 1100 x 1100 x 120 mm | |
|---|---|---|
| Hardware/leg carton dimensions | 850 x 220 x 120 mm | |
| Total shipping gross weight | 37 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential small dining room | Fits 8sqm dining spaces with 4-person casual dining capacity | |
|---|---|---|
| Apartment kitchen breakfast nook | Compact round footprint fits narrow kitchen dining zones | |
| Small office breakout area | Provides casual meeting and lunch seating for staff teams | |
| Studio open-plan living space | Light wood finish complements Scandinavian minimalist interiors | |
| Cafe small dining zone | Durable solid wood build supports daily commercial light use | |
| Recommended seating pairing | Four standard dining chairs with 450mm seat height for ergonomic use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable to safety, strength and durability for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Applicable to stability testing for domestic seating and tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for wooden furniture | |
|---|---|---|
| GB/T 4893.1-2021 | Applicable to surface wear resistance testing of furniture finishes | |
| GB 18584-2001 | Applicable to formaldehyde emission limits for wooden interior furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture; 2. GB/T 4893.1-2021: Applicable to surface wear resistance testing of furniture finishes; 3. GB 18584-2001: Applicable to formaldehyde emission limits for wooden interior furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
