Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1190 × 510 × 810 mm | |
|---|---|---|
| Under-cabinet floor clearance | 180 mm | |
| Upper drawer count | 2 units | |
| Per upper drawer internal dimensions | 530 x 400 x 140 mm | |
| Lower cabinet door count | 2 units | |
| Lower cabinet interior shelf count | 1 unit | |
| Per door width | 530 mm | |
| Navy fluted side panel radius | 100 mm | |
| Leg diameter | 25 mm | |
| Gold trim frame width | 15 mm | |
| Pull handle length | 60 mm | |
| Carcass panel thickness | 18 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 50 kg | |
|---|---|---|
| Total cabinet net weight | 42 kg | |
| Hinge open-close cycle rating | 50000 cycles | |
| Drawer slide open-close cycle rating | 40000 cycles | |
| Surface scratch resistance rating | 2B | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main carcass core | 18mm MDF/particleboard engineered wood | |
|---|---|---|
| Front drawer/door panels | Light oak wood-grain matte laminate finish | |
| Side end panels | Navy blue vertically fluted textured MDF panels | |
| Front decorative frame | Gold brushed brass-finish steel trim | |
| Support legs | 25mm diameter gold-plated steel cylindrical legs | |
| Drawer/door hardware | Zinc alloy gold-finished pull handles | |
| Edge banding | 1mm thick PVC matching front and panel finishes | |
| Back panel | 3mm thick hardboard | |
| Drawer slides | Cold-rolled steel full-extension side-mount slides | |
| Door hinges | Cold-rolled steel soft-close concealed hinges | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Upper drawer operation | Full-extension glide for access to small loose items | |
|---|---|---|
| Lower cabinet door operation | 110-degree swing open with soft-close damper | |
| Interior shelf adjustability | 3-position height adjustment in 32mm increments | |
| Leveling function | Adjustable foot pads integrated into leg bases | |
| Anti-tip safety | 2 wall-mounted anti-tip restraint brackets included | |
| Surface maintenance | Stain-resistant matte finish for wipe-clean care | |
| Storage zoning | Separate top shallow drawers and lower deep cabinet | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential entryway use | Provides storage for keys, mail and entry accessories at accessible standing height | |
|---|---|---|
| Living room accent use | Functions as a decorative display and media accessory storage piece | |
| Dining room sideboard use | Stores table linens, serveware and dining accessories near dining tables | |
| Home office credenza use | Holds office supplies, files and decor adjacent to work desks | |
| Target user group | Residential homeowners and commercial space designers seeking modern luxury storage |
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops, safety and performance requirements | |
|---|---|---|
| EN 717-1:2004 | Wood-based panels formaldehyde release determination, applicable for material inspection |
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emissionAcceptance inspection |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural inspection; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emissionAcceptance inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool