| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Primary Component Thickness | 40 mm according to load-bearing role | |
|---|---|---|
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total product weight including base | 45 kg | |
|---|---|---|
| Recommended static base weight for wind resistance | 30 kg | |
| Recommended maximum user capacity under canopy | 4 people | |
| Canopy fabric UV protection factor | UPF 50+ | |
| Fabric water resistance rating | 300 mm hydrostatic head | |
| Maximum stable wind speed without anchoring | 28 km/h | |
| Crank lift mechanism cycle life | 1000 open/close cycles | |
| Static load on central pole | 80 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Canopy main fabric | 280g/sqm solution-dyed polyester | |
|---|---|---|
| Central support pole | Brushed 304 stainless steel | |
| Canopy support ribs | Powder-coated steel ribs | |
| Hub connector components | Reinforced nylon internal hub | |
| Square weight base | Powder-coated steel shell filled with concrete | |
| Crank lift mechanism | Zinc-plated steel crank and gear set | |
| Canopy edge trim | Reinforced polyester webbing binding | |
| Top finial | Stainless steel decorative finial | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Canopy open/close operation | Manual crank lift with 80mm handle rotation travel | |
|---|---|---|
| Canopy tilt function | No tilt adjustment, fixed vertical orientation | |
| Base mounting | Freestanding weighted base, no permanent floor anchoring required | |
| Pole to table compatibility | Fits standard patio table umbrella holes of 50mm diameter | |
| Canopy venting | Single top center vent for wind pressure release | |
| Fabric maintenance | Removable canopy for hand washing and replacement | |
| Locking function | Auto-lock at full open position to prevent unintended closing | |
| Assembly requirement | Tool-free assembly of pole sections, canopy and base | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Covers 4-seat outdoor dining sets for backyard or garden seating | |
|---|---|---|
| Commercial outdoor seating | Suitable for cafe, restaurant and hotel terrace dining areas | |
| Poolside shade application | Corrosion-resistant stainless steel pole withstands humid poolside environments | |
| Balcony shade use | Fits large residential balconies for outdoor seating shade | |
| Event temporary shade | Quick assembly for pop-up events, markets and outdoor gatherings | |
| Recommended complementary furniture | Pairs with 1000mm square patio dining tables and 4 outdoor dining chairs |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
