| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint (canopy diameter x total height) | 2743 x 2515 mm | |
|---|---|---|
| Central support pole diameter | 38 mm | |
| Canopy rib count | 8 units | |
| Steel support rib stock thickness | 1.2 mm | |
| Crank mechanism mounting height above base | 1220 mm | |
| Top air vent diameter | 200 mm | |
| Canopy valance overhang length per rib | 150 mm | |
| Base height (ground to pole connection) | 203 mm | |
| Under-canopy clearance height at center | 2160 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Umbrella unit net weight | 7.3 kg | |
|---|---|---|
| Total assembled unit weight (umbrella + base) | 25 kg | |
| Canopy shade coverage capacity | 6 people | |
| Canopy UV protection rating | UPF 50+ | |
| Maximum safe operating wind speed | 24 km/h | |
| Crank lift full open/close cycle time | 10 seconds | |
| Tilt mechanism maximum angle range | 30 degrees | |
| Fabric water repellency rating | 1000 mm hydrostatic head | |
| Limited consumer warranty period | 1 year | |
| Round weighted base diameter | 680 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Canopy fabric | 100% solution-dyed polyester, UV/fade/water-resistant | |
|---|---|---|
| Central support pole | 2-piece powder-coated aluminum, rust-resistant | |
| Support ribs | Oval-profile powder-coated steel, 1.2mm stock thickness | |
| Crank/tilt mechanism housing | Glass-reinforced nylon with steel internal gears | |
| Weighted base shell | UV-stabilized high-density polyethylene resin, matte black finish | |
| Base fill material | Injected high-density cement core for stable ballast | |
| Pole-to-base connection hardware | Zinc-plated steel locking knob with plastic pole adaptors | |
| Canopy closure strap | Woven polyester webbing with plastic snap fastener | |
| Canopy apex cap | Injection-molded UV-resistant plastic, dark teal finish | |
| Frame finish | Textured matte powder coat, anti-corrosion treated | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Hand crank lift mechanism | Rotating side crank opens/closes canopy fully with 3 clockwise turns | |
|---|---|---|
| Push-button tilt adjustment | Spring-loaded lock button allows 5 tilt positions to track sun angle | |
| Top wind vent | Centered upper canopy vent allows air passage to reduce wind lift | |
| Two-piece pole assembly | Pole sections join with friction-fit locking collar for easy transport/storage | |
| Tool-free base attachment | Pole inserts into base socket, secured with hand-tightened locking knob | |
| Canopy closure retention | Integrated fabric strap wraps around folded canopy to secure when stored | |
| 360-degree stationary shade | Fixed center-pole design provides symmetric shade without rotational mechanism | |
| Quick disassembly for storage | Pole separates from base, canopy folds compactly for off-season storage | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio dining sets | Fits 54inch round/rectangular patio tables seating 6people for outdoor meals | |
|---|---|---|
| Poolside lounge areas | Provides UV-shaded seating for chaise lounges and side tables adjacent to swimming pools | |
| Backyard garden entertaining | Covers small conversation seating groups for casual outdoor gatherings and events | |
| Commercial outdoor café seating | Suitable for light-duty bistro and restaurant patio seating areas with stable base placement | |
| Balcony and deck spaces | Fits compact residential balconies and elevated decks with stable non-penetrating base | |
| Seasonal outdoor markets | Provides temporary vendor shade for pop-up stalls and farmers market displays on paved surfaces |
EU Market Access Requirements* EN Standards
| EN 13561:2015 | Applies to external sun shading devices, specifies wind resistance and operational safety performance requirements | |
|---|---|---|
| EN 13782:2015 | Applies to free-standing temporary outdoor structures, specifies stability and load requirements for portable shade units |
Standards applicable to China-market projects
| GB/T 23147-2018 | Applies to outdoor leisure umbrellas, specifies structural stability and material durability requirements for sun-shading products | |
|---|---|---|
| GB 18401-2010 | Applies to textile canopy fabrics, sets minimum safety limits for formaldehyde and carcinogenic dye content | |
| GB/T 21655.1-2008 | Applies to canopy textiles, specifies test methods for water absorption and repellency performance |
This product must meet the following technical requirements: 1. GB/T 23147-2018: Applies to outdoor leisure umbrellas, specifies structural stability and material durability requirements for sun-shading products; 2. GB 18401-2010: Applies to textile canopy fabrics, sets minimum safety limits for formaldehyde and carcinogenic dye content; 3. GB/T 21655.1-2008: Applies to canopy textiles, specifies test methods for water absorption and repellency performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
