Product supplier3-Piece Folding Wood Slatted Outdoor Bistro Set with Umbrella Hole, Solid hardwood with teak oil finish, slatted construction
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 600 × 600 × 750 mm | |
|---|---|---|
| Overall table dimensions | 600 x 600 x 750 mm | |
| Center umbrella hole diameter | 50 mm | |
| Wood slat thickness | 20 mm | |
| Slat gap width | 10 mm | |
| Overall folded table dimensions | 930 x 600 x 80 mm | |
| Overall chair dimensions (per unit) | 470 x 510 x 890 mm | |
| Seat height from ground | 450 mm | |
| Seat usable dimensions | 380 x 320 mm | |
| Chair backrest height above seat | 440 mm | |
| Folding X-leg cross section | 30 x 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static weight capacity per chair | 181 kg | |
|---|---|---|
| Static weight capacity for tabletop | 100 kg | |
| Total set net weight | 18.1 kg | |
| Recommended user capacity | 2 adults | |
| Surface weather resistance rating | 200 hours UV exposure | |
| Folding mechanism cycle life | 1000 open/close cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop slats | Solid hardwood with teak oil finish, slatted construction | |
|---|---|---|
| Chair seat/back slats | Solid hardwood with matching teak oil finish | |
| Folding leg frames | Solid hardwood X-brace construction | |
| Folding pivot hardware | Zinc-plated steel hinges and bolts | |
| Umbrella hole insert | Steel rim with plastic bushing | |
| Foot pads | Non-slip rubber caps on all leg ends | |
| Surface coating | Exterior-grade clear varnish/sealer | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Table folding mechanism | Hinged X-brace leg design, folds completely flat without tools | |
|---|---|---|
| Chair folding mechanism | Matching X-frame hinged folding design, locks in open position | |
| Center umbrella hole | Through-table cutout sized for 50mm patio umbrella poles | |
| Slat drainage design | Uniform gaps between all wood slats | |
| No required assembly | Fully assembled factory construction | |
| Stackable storage compatibility | Chairs and table fold to 80mm thickness | |
| Weighted base support | Table clearance accommodates 450mm diameter concrete umbrella base | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Small balcony use | Ideal for apartment balconies under 4 sqm, compact footprint saves space | |
|---|---|---|
| Residential patio seating | Suitable for covered back patios and garden nooks for casual drinks | |
| Poolside casual seating | Water-shedding slat design works for poolside placement with regular wood care | |
| Pop-up cafe use | Lightweight folding design supports temporary outdoor seating setups | |
| Entryway accent seating | Works as compact decorative seating near exterior residential entry doors | |
| Recommended companion accessories | 50mm diameter patio umbrella and 25kg concrete weighted base |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety standard applicable for residential patio seating | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating and tables |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB 28007-2011 | Applicable for children's furniture safety if used in family outdoor spaces | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for wooden furniture applicable for material inspection |
Standardized tender description text
This product must meet the following technical requirements: 1. GB 28007-2011: Applicable for children's furniture safety if used in family outdoor spaces; 2. GB/T 3324-2017: General technical requirements for wooden furniture applicable for material inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool