| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 400 x 450 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Net product weight | 42 kg | |
|---|---|---|
| Top surface static load capacity | 50 kg | |
| Recommended maximum TV size | 75 inch | |
| Drawer slide cycle rating | 30000 open/close cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet frame | Solid rubberwood with natural clear matte finish | |
|---|---|---|
| Drawer front panels | 18mm thick MDF with matte white PU paint finish | |
| Support legs | Solid rubberwood tapered cylindrical legs | |
| Drawer handles | Solid rubberwood horizontal/vertical pulls | |
| Top surface | 25mm thick solid rubberwood panel | |
| Drawer internal box | 12mm thick plywood with smooth melamine lining | |
| Back panel | 5mm thick MDF with pre-drilled cable management cutouts | |
| Drawer slides | Cold-rolled steel side-mount 3/4 extension slides | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Storage configuration | 4 equal-width soft-close drawers across full cabinet width | |
|---|---|---|
| Cable management | Pre-cut openings on back panel for AV and power cord routing | |
| Floor protection | Non-slip felt pads pre-installed on leg bases | |
| Assembly requirement | Knock-down assembly with legs attached via included hex hardware | |
| Drawer operation | Pull-handle actuation with 300mm extension depth | |
| Surface use | Flat, level top surface suitable for TV placement and decor display | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed against a wall as primary media storage under wall-mounted or stand-mounted TVs | |
|---|---|---|
| Small apartment living spaces | Compact 400mm depth fits narrow rooms without protruding into walkways | |
| Bedroom media setup | Used at foot of bed or bedroom wall for smaller TV and linen storage | |
| Scandinavian/Japandi interior schemes | Two-tone natural wood and white finish matches minimalist Nordic design palettes |
EU Market Access Requirements* EN Standards
| Surface durability | EN 15187:2006 | |
|---|---|---|
| Structural safety | EN 14749:2016 |
Standards applicable to China-market projects
| Formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| Mechanical stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Formaldehyde emission: GB/T 18580E1 grade; 2. Mechanical stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
