| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2000 x 400 x 450 mm | |
|---|---|---|
| Floor clearance under unit | 120 mm | |
| Top panel thickness | 25 mm | |
| Side drawer internal size | 400 x 340 x 140 mm | |
| Central open cubby clear height | 180 mm | |
| Central lower drawer internal depth | 340 mm | |
| Carcass side panel thickness | 18 mm | |
| Back panel thickness | 8 mm | |
| Recessed pull handle dimensions | 120 x 25 x 12 mm | |
| Leg base contact footprint | 60 x 60 mm | |
| Open cubby internal width (per bay) | 450 mm | |
| Corner edge radius | 3 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Top surface maximum static load | 75 kg | |
|---|---|---|
| Shelf maximum distributed load | 30 kg/㎡ | |
| Drawer maximum static load per unit | 15 kg | |
| Total unit maximum static load | 150 kg | |
| Wood moisture content | 10% | |
| Unit net weight | 65 kg | |
| Recommended maximum TV screen size | 75 in | |
| Drawer slide cycle rating | 50000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Frame and carcass | Solid hardwood, walnut tone finish | |
|---|---|---|
| Top surface | Polished solid wood panel, smooth wear-resistant finish | |
| Drawer fronts | Solid wood panels with integrated curved recessed pulls | |
| Legs | Solid hardwood short tapered legs with wide floor contact | |
| Back panel | Engineered wood veneer panel with pre-drilled cable ports | |
| Drawer slides | Cold-rolled steel soft-close full-extension slides | |
| Surface finish | Water-based wood wax oil, low-VOC, stain-resistant coating | |
| Foot pads | Non-slip rubber pads at leg bases | |
| Internal drawer boxes | Solid wood drawer boxes with dovetail joinery | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Storage layout | Two end full-height drawers, two central open AV cubbies, two shallow central lower drawers | |
|---|---|---|
| Cable management | Pre-drilled 50mm diameter cable ports at back of open cubbies | |
| Drawer operation | Soft-close slides with integrated recessed pulls, 3N opening force | |
| Floor leveling | Non-slip foot pads to level unit and protect hard flooring | |
| Edge protection | R3 rounded corners on all exposed edges to reduce impact injury | |
| Ventilation | Open cubby design provides passive airflow for heat dissipation from AV devices | |
| Assembly requirement | Factory pre-assembled main carcass, only legs require on-site attachment | |
| Surface resistance | Stain-resistant finish supports dry cloth cleaning for daily maintenance | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room media center | Placed below wall-mounted TVs for media equipment storage and decor display | |
|---|---|---|
| Apartment and home use | Suits 55 to 75 inch flat screen TVs in medium to large living areas | |
| New Chinese / modern rustic interiors | Matches walnut wood tone, curved recessed pull traditional design elements | |
| AV equipment storage | Open cubbies accommodate set-top boxes, game consoles, and media players | |
| Closed storage use | Drawers store remote controls, media accessories, and small living room items | |
| Hard flooring placement | Non-slip foot pads suit wood, tile, and laminate flooring without scratching |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety requirements for domestic storage furniture, applicable for tip-over and structural safety | |
|---|---|---|
| EN 71-3:2019 | Migration of certain elements, applicable for low-toxicity finish material acceptance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural and finish quality acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit, applicable for environmental acceptance | |
| GB/T 4893.8-2013 | Furniture surface wear resistance test method, applicable for top surface durability acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural and finish quality acceptance; 2. GB 18584-2001: Indoor decoration material formaldehyde emission limit, applicable for environmental acceptance; 3. GB/T 4893.8-2013: Furniture surface wear resistance test method, applicable for top surface durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
