| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 4600 x 2750 x 2750 mm | |
|---|---|---|
| Single rectangular canopy dimensions | 2300 x 2750 mm | |
| Central support pole diameter | 82 mm | |
| Base footprint overall | 1000 x 1000 mm | |
| Undercanopy clearance height | 2200 mm | |
| Cantilever arm projection from central pole | 2200 mm | |
| Canopy vent diameter per panel | 200 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total shaded coverage area | 13 m² | |
|---|---|---|
| Fully assembled total product weight | 195 kg | |
| Recommended static weight capacity for stability | 136 kg | |
| Maximum recommended wind speed for safe use | 38 km/h | |
| Canopy UV protection factor | UPF 50+ | |
| Recommended user seating capacity under shade | 8 people | |
| Fabric water resistance rating | 300 mm | |
| Frame rust resistance service life | 3 years | |
| Single base weight slab dimensions | 500 x 500 x 80 mm | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Central support pole | 1.5 mm thick powder-coated black steel tube | |
|---|---|---|
| Cantilever support arms | 1.2 mm thick powder-coated black steel | |
| Canopy support ribs | 0.8 mm thick powder-coated steel, 12 total ribs (6 per canopy) | |
| Canopy fabric | 280 GSM solution-dyed beige polyester with PA coating | |
| Canopy stitching | Polyester bonded thread with 8 stitches per inch | |
| Base weight slabs | High-density concrete with gray textured finish | |
| Hardware fasteners | Stainless steel bolts, nuts, and locking pins | |
| Lift mechanism components | Zinc-plated steel crank and gear assembly | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Canopy open/close operation | Side-mounted crank handle with 3:1 gear ratio to raise/lower both canopies | |
|---|---|---|
| Canopy tilt adjustment | Push-button lock with 3 tilt positions per canopy for sun angle adjustment | |
| 360-degree rotation | Foot-pedal actuated rotation to reposition shade over desired area | |
| Wind vent design | Single top air vent per canopy to reduce wind uplift and prevent inversion | |
| Base assembly | Four interlocking weight slabs secured to central crossbar without permanent fixation | |
| Pole disassembly | Two-section pole with push-button quick connection for transport and storage | |
| Canopy lock mechanism | Auto-lock when fully opened to prevent unintended folding during use | |
| Seasonal storage | Canopy removable from frame for cleaning or off-season indoor storage | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard patio, deck, or poolside shading for outdoor dining sets | |
|---|---|---|
| Commercial outdoor seating | Ideal for café, restaurant, or beer garden outdoor seating zones | |
| Event rental application | Suitable for outdoor weddings, markets, and temporary event shading | |
| Open-air lounge areas | Works over outdoor sectional lounge sets for continuous shade across large seating groups | |
| Coastal environment use | Stainless steel hardware and powder-coated frame resist salt air corrosion | |
| Seasonal outdoor installation | Designed for temporary seasonal set-up with easy disassembly for winter storage |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety | EN 581:2015 |
|---|
Standards applicable to China-market projects
| Outdoor furniture structural safety | GB 28478 | |
|---|---|---|
| Textile UV protection performance | GB/T 18830 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety: GB 28478; 2. Textile UV protection performance: GB/T 18830; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
